Description
There's a reason rifle builders have used the Howa 1500 barreled action as a foundation for custom projects for decades. It's a forged, one-piece steel receiver mated to a hammer-forged barrel, and it runs with a smoothness that surprises people who haven't handled one. This version takes that proven action and drops it into a stock from HS Precision, the same folks who have been building stocks for serious tactical and hunting rifles since the 1980s. The result is a 6.5 PRC rifle that punches well above its weight class for factory hardware.
What Makes the HS Precision Stock Worth It
The stock is the star of the show here. HS Precision builds each one in the United States, starting with an aluminum bedding block CNC-machined to fit the Howa 1500 action. That block goes into a mold and gets hand-laminated with layers of Kevlar, fiberglass, and carbon fiber, then hand-finished. Full-length aluminum bedding means the action sits in a rigid, stable platform that won't shift with weather, humidity, or hard use in the truck or the field. The gray finish with black webbing looks sharp without being flashy, and sling studs come mounted front and rear.
A 6.5 PRC Setup Built to Stretch Out
The 24 inch blued barrel gives the 6.5 PRC cartridge room to build velocity, and the 1:8 twist stabilizes the long, high-BC bullets this round was designed around. The threaded muzzle is ready for a brake or suppressor whenever you are. Feeding comes from a 3+1 internal magazine with a hinged floorplate, and the receiver is drilled and tapped for your choice of bases or a rail.
Trigger and Handling on the Howa M1500
Howa's two-stage HACT trigger breaks clean with minimal overtravel, and it's one of the better factory triggers you'll find at this level. At 7.8 pounds bare, the rifle carries fine on a hunt but has enough heft to settle down nicely on bags. For elk, mule deer, or steel past 800 yards, this one covers a lot of ground with a single rifle.
Key Specifications
- Manufacturer: Howa
- Model: M1500 HS Precision
- MPN: HHS45531
- UPC: 682146399301
- Caliber: 6.5 PRC
- Action: Bolt Action
- Capacity: 3+1
- Barrel Length: 24"
- Muzzle: Threaded
- Twist Rate: 1:8"
- Overall Length: 44.75"
- Weight: 7.8 lbs
- Stock: HS Precision Synthetic, Gray w/Black Webbing
- Receiver: Black Steel
- Sights: None, Drilled & Tapped
- Trigger: Two-Stage HACT
What’s Included
- Howa M1500 HS Precision rifle
- Owner's manual
Frequently Asked Questions
Is the Howa M1500 HS Precision accurate enough for long-range hunting?
Yes, this is one of the better factory setups for the money. The hammer-forged barrel, two-stage HACT trigger, and the full-length aluminum bedding block in the HS Precision stock all work together for consistent, repeatable accuracy. The 6.5 PRC chambering is a proven performer on deer and elk-sized game well past 500 yards.
Does this rifle come with a scope or sights?
No, it ships without optics or iron sights. The receiver is drilled and tapped, so you can mount Howa 1500 pattern bases or a one-piece rail and top it with the scope of your choice. A quality 3-15x or 4-16x optic pairs nicely with what the 6.5 PRC can do.
Can I put a suppressor or muzzle brake on the M1500 HS Precision?
The 24 inch barrel comes threaded from the factory, so adding a brake or suppressor is straightforward. Just confirm your device's thread pitch matches before ordering a mount. A brake noticeably tames the already mild recoil of the 6.5 PRC.
How is the HS Precision stock different from a regular synthetic stock?
Most budget synthetic stocks are injection-molded plastic that can flex under load. This one is hand-laminated in the USA with Kevlar, fiberglass, and carbon fiber around a CNC-machined aluminum bedding block cut specifically for the Howa 1500 action. That rigid backbone keeps the action stable and your zero consistent through weather changes and rough handling.



Reviews
There are no reviews yet.