$71.99
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The .375 H&H Magnum is a legendary big-game round, and if you're feeding a rifle chambered in it, you already know factory ammo can be tough to find and even tougher on the wallet. Rolling your own is the smart move, and Hornady's unprimed brass gives you a clean, uniform starting point that holds up round after round. This is fresh, new, unprimed brass ready to prep, prime, charge, and seat however your load workup calls for.
Hornady approaches its brass the same way it approaches the bullets that made the company famous. Cases are produced in smaller lots to keep quality tight, and every piece gets hand inspected before it heads out the door. They measure for consistent wall concentricity and run the brass through pressure calibration testing to keep case expansion uniform when you touch it off. That attention to detail translates into consistent charges, steady pressures, and the kind of shot-to-shot repeatability that matters when you're stretching out on plains game or dangerous game.
Uniform case wall thickness has long been a benchmark benchrest guys chase, and Hornady builds it into this brass with tight tolerances. You also get consistent weight and internal capacity, which keeps your powder charges behaving predictably from one case to the next. Tight concentricity helps the bullet seat straight in both the case and the chamber, and that squared-away alignment is a big part of squeezing real accuracy out of a hard-recoiling magnum.
Because Hornady takes extra care in the manufacturing, you can generally expect more reloads per case compared to bargain-bin brass. Give each piece a good inspection, size and trim to spec, and it'll reward you with dependable service through plenty of firing cycles. For a caliber where every trigger pull counts, starting with quality brass is money well spent.
No, these are new unprimed cases and not loaded ammunition. They're a reloading component, so you'll need to size, prime, charge with powder, and seat a bullet before firing. Think of them as the clean foundation for your own load workup.
Hornady produces its brass in smaller lots with careful quality control, which generally means more reloads per case than budget brass. Actual case life depends on your load pressures, sizing practices, and how well you maintain the brass. Keep charges reasonable and inspect for signs of wear, and you can expect solid service through many cycles.
It's a good habit with any new rifle brass. A quick inspection, a light resize, checking case length and trimming if needed, plus cleaning up the case mouths will get everything uniform before you prime and charge. Prepping once up front pays off in more consistent results downrange.
Yes, this is standard .375 H&H Magnum brass suitable for the full range of loads for the cartridge. Always follow published load data from a current reloading manual for your chosen bullet and powder. Hornady's uniform wall thickness and capacity help keep pressures predictable across your load range.
| UPC | 090255486858 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 8685 |
| Shipping Weight | 1.75 |
You must be logged in to post a review.
Reviews
There are no reviews yet.