Description
The .30-06 Springfield has been a workhorse for over a century, and if you handload for it, your results start with good brass. Hornady unprimed .30-06 cases give you a clean, ready-to-prep foundation for building accurate hunting and target loads, and this 1500-count box keeps the high-volume reloader stocked for a long stretch at the bench.
What Sets Hornady .30-06 Brass Apart
Hornady produces these cases in smaller lots that meet strict quality standards, which pays off in the kind of uniformity reloaders care about. You get consistency in wall thickness, weight, and internal capacity, so your powder charges and pressures stay predictable from one case to the next. Each case is measured for tight wall concentricity and run through a pressure calibration test to confirm uniform expansion during firing. That translates to proper bullet seating in both the case and the chamber, and it sets you up for repeatable accuracy once you dial in your load.
Working With These .30-06 Cases at the Bench
These are unprimed and unprocessed, so they're a true starting point. The .30-06 runs on a standard large rifle primer, and the case holds roughly 68 grains of water capacity with a SAAMI trim length of 2.494 inches. It's one of the most forgiving cartridges to load, happy with a huge range of powders and bullet weights from light varmint pills to heavy 220-grain game bullets. Neck tension is generally good enough that many handloaders skip crimping altogether. Prep them the way you would any new brass: inspect, resize if needed, trim to length, and chamfer before priming and charging.
A Smart Pick for High-Volume Reloaders
Buying brass in a 1500-count box makes sense when you're feeding a hard-used deer rifle, loading for the whole family, or shooting enough that smaller boxes won't keep up. The Hornady headstamp is also a solid base for several .30-06 family wildcats if you like to tinker. Pair these with quality dies and your preferred primers and powder, and you've got everything you need to build dependable .30-06 ammunition.
Key Specifications
- Manufacturer: Hornady
- Caliber: .30-06 Springfield
- Component Type: Unprimed Rifle Cartridge Cases
- Material: Brass
- Quantity: 1500 Count
- Primer Type: Large Rifle
- Primed: No
- Case Length (SAAMI): 2.494 in
- Case Capacity: Approx. 68 gr H2O
- Case Type: Rimless, Bottleneck
- Manufacturer Part Number: 8665B
- UPC: 090255600285
What’s Included
- 1500 Hornady unprimed .30-06 Springfield brass cases
Frequently Asked Questions
Are these Hornady .30-06 cases primed or do I need my own primers?
These are unprimed cases, so they do not come with primers installed. The .30-06 Springfield uses a standard large rifle primer, which you'll add during your reloading process. You'll supply your own primers, powder, and bullets to build a complete cartridge.
Do I need to trim or prep this Hornady brass before loading?
It's good practice to inspect, resize, and check length on any new brass before loading. The SAAMI trim length for the .30-06 is 2.494 inches, so trim any cases that run long and chamfer the case mouths before priming. A quick prep pass helps keep your first firing consistent.
What makes Hornady .30-06 brass a good choice for reloading?
Hornady produces these cases in smaller lots held to strict quality standards for uniform wall thickness, weight, and internal capacity. The brass is measured for tight wall concentricity and pressure tested for uniform expansion, which helps deliver consistent charges, pressures, and repeatable accuracy. That uniform foundation is what good handloads are built on.
Why buy .30-06 brass in a 1500-count box?
The 1500-count box is built for high-volume reloaders who go through a lot of brass or want to load in large batches. Buying in bulk keeps your bench stocked and saves you from reordering between loading sessions. It's a practical option if you shoot your .30-06 often or load for more than one rifle.




Reviews
There are no reviews yet.