Description
The .257 Weatherby Magnum is one of the flattest-shooting quarter-bores out there, and feeding one means handloading more often than not. This Hornady brass gives you a clean, new, unprimed starting point built to the same standards the company uses for its loaded ammo. Each case is checked for tight wall concentricity, uniform wall thickness, and consistent weight and capacity, which is exactly what you want when you're chasing repeatable velocity out of a high-pressure magnum.
Why This .257 Weatherby Brass Earns Its Spot on the Bench
Concentricity and uniform wall thickness are the two details that matter most to accuracy, and Hornady puts real effort into both. Even wall thickness helps the case sit straight in the chamber and lets the bullet seat square, which translates to tighter groups and more predictable pressures round to round. The .257 Wby runs hot by design, so starting with brass that's dimensionally consistent takes a lot of guesswork out of load development.
Prepping Your Hornady .257 Wby Cases
Like any new rifle brass, give these a once-over before loading. A quick run through your sizing die, a trim to length, and a chamfer on the case mouths gets everything uniform and chambering smooth. The .257 Weatherby headspaces on the belt and wears the signature Weatherby double-radius shoulder, so many experienced loaders use a minimal shoulder bump and anneal every few firings to stretch case life. Magnum primers are the standard call here thanks to the big powder capacity and slow-burning propellants this cartridge likes.
Built in the USA for the Reloader
This is a component, not loaded ammunition, so you'll supply your own primers, powder, and bullets. For anyone running a .257 Weatherby, owning your own supply of quality brass is the ticket to shooting more without hunting down hard-to-find factory loads. Hornady's reputation among home reloaders is well earned, and this brass keeps that going.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 8631
- UPC: 090255486315
- Caliber: .257 Weatherby Magnum
- Type: Centerfire Rifle Brass
- Condition: New, Unprimed
- Material: Brass
- Quantity: 50 per pack
- Case Type: Belted Magnum, double-radius shoulder
- Country of Origin: United States
What’s Included
- 50 new unprimed Hornady .257 Weatherby Magnum brass cases
Frequently Asked Questions
Is this Hornady .257 Weatherby Magnum brass primed or loaded?
No, these are new, unprimed brass cases and not loaded ammunition. They're a reloading component, so you'll add your own primers, powder, and bullets. The .257 Weatherby runs best with large rifle magnum primers because of its big case capacity and slow-burning powders.
Do I need to prep the brass before loading it?
A little prep goes a long way with any new rifle brass. Run the cases through your sizing die, trim to length, and chamfer the mouths so everything chambers smoothly and seats uniformly. Giving them a quick inspection first helps catch any case mouths that need attention.
How many times can I reload .257 Weatherby brass?
Case life depends heavily on how hot you load and how well you prep. Loaders who run moderate charges, bump the shoulder minimally, and anneal every few firings tend to get the most cycles out of their brass. Since the .257 Weatherby works brass hard, conservative load development pays off in longevity.
Will my standard .257 Weatherby dies work with this brass?
Yes, quality full-length or body dies in .257 Weatherby Magnum will work with these Hornady cases. Because the cartridge headspaces on the belt and has the double-radius Weatherby shoulder, many reloaders set their dies for a minimal shoulder bump to reduce stretching. A case gauge helps you dial in your die setup correctly.




Reviews
There are no reviews yet.