$39.99
32 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The .25-35 Winchester is one of those old-school lever-action cartridges that factory ammo shelves tend to skip, which makes good brass worth its weight in gold if you shoot one. Hornady's unprimed cases give handloaders a clean, consistent starting point so you can build loads tailored to your rifle instead of settling for whatever you can find. Each piece is new and unprimed, ready to be sized, charged, and loaded to your own recipe.
Hornady treats its brass as the foundation of an accurate cartridge rather than a commodity. These cases are measured for tight wall concentricity, which helps the bullet seat straight in both the case and your chamber. That squared-away alignment translates to a more uniform release when the round goes off, and that's where consistent velocity and accuracy come from. The brass also runs through a pressure calibration check to promote even case expansion during firing.
Uniform case wall thickness has long been a benchmark benchrest folks chase, and it's baked into how this brass is made. Hornady holds tight tolerances so weight and internal capacity stay close piece to piece, which keeps your charges and pressures predictable round after round. Because the brass is built with care up front, it tends to hold up well through multiple firings, so you get more reloads out of each case over its life.
The .25-35 WCF runs a thin case neck by design, so it's smart to inspect your cases and resize them before loading, especially if any mouths got knocked slightly out of round in transit. Go easy during the first sizing pass and you'll have a tidy batch ready to prime and charge. Pair these with the right primer, powder, and .257 diameter bullets, and your old Winchester or Marlin lever gun will be back in business.
These cases are new and unprimed, so they are not loaded ammunition. You'll need to add a primer, powder, and a .257 diameter bullet to build a finished round. It's a blank slate for handloading your own .25-35 Winchester loads.
It's a good idea to inspect and resize before loading. The .25-35 WCF has a thin case neck by design, and case mouths can get nudged slightly out of round during shipping. A pass through your sizing die squares everything up so bullets seat cleanly.
Hornady measures these cases for tight wall concentricity and uniform wall thickness, which helps bullets seat straight and release consistently. The brass is also run through a pressure calibration check for even expansion. That care up front tends to mean more reloads and more predictable pressures over the life of each case.
The .25-35 Winchester uses .257 inch diameter bullets. Lighter spitzer and flat-point options in the 60 to 120 grain range are popular, with flat or round nose bullets being the safe choice for tube-fed lever actions. Match your bullet selection to your rifle and intended use.
| UPC | 090255861013 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 86101 |
| Caliber/Gauge | .25-35 Winchester |
| Length | 4.9000 |
| Quantity | 50 |
| Shipping Weight | 0.95 |
You must be logged in to post a review.
Reviews
There are no reviews yet.