Description
If you're running the Hornady Neck Turning Tool and working with .25 caliber brass, this is the mandrel that makes it happen. The tool itself ships with mandrels for only a handful of popular calibers, so when you branch out into cartridges like .25-06, .257 Roberts, or other quarter-bore rounds, you need the matching .25 cal mandrel to do the job right. This one is precision ground to roughly .2545 and threads into the cutter head to support the case from the inside while the blade trims the outside of the neck.
What the .25 Cal Mandrel Does During a Turn
The mandrel is the backbone of the whole operation. The case neck slips over it and rides on that solid surface so the cutter can skim material off the outside without the case twisting or wandering. Because the mandrel is sized just under bullet diameter, it leaves a touch of clearance for lubrication and gives you a true reference to cut against. The result is uniform neck wall thickness, which translates to more consistent bullet release and tighter groups downrange.
Fitting the .25 Caliber Turning Mandrel
This mandrel is designed specifically for the Hornady Neck Turning Tool and threads in from the back of the cutter head, locking in place with the ring so you can set your cut depth and leave it. Keep in mind the standard practice: size your brass first, expand the necks to accept the mandrel, and lube the inside of the neck before each pass. A little wax or case lube goes a long way toward a smooth cut and keeps heat down if you're running a drill motor.
Why Quarter-Bore Reloaders Reach for It
Neck turning is one of those steps that separates good handloads from great ones. By evening out the thick and thin spots on a case neck, you get more predictable neck tension round to round. For anyone chasing accuracy with a .25 cal rifle, this mandrel is the piece that lets the Hornady tool do its thing on your brass.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 391915
- UPC: 090255919158
- Caliber: .25 Caliber
- Mandrel Diameter: Approx. .2545 in
- Type: Neck turning mandrel
- Compatibility: Hornady Neck Turning Tool
- Finish: Silver
- Quantity: 1 mandrel
What’s Included
- One Hornady .25 caliber neck turning mandrel (MPN 391915)
Frequently Asked Questions
Does this .25 cal mandrel work with the Hornady Neck Turning Tool?
Yes. This mandrel is made specifically for the Hornady Neck Turning Tool and threads into the cutter head from the back. It's the caliber-specific piece you add when you want to turn .25 cal brass, since the tool only comes with a few common caliber mandrels out of the box.
Do I need to prep my brass before using the turning mandrel?
You do. Size and clean your cases first, then expand the necks so they slide over the mandrel, and lube the inside of the neck before each pass. Taking those steps gives you a smooth cut and helps keep heat down if you're spinning the case with a drill.
What's the diameter of this mandrel?
It measures roughly .2545, which is slightly under bullet diameter for the .25 caliber. That little bit of clearance is intentional so you have room for lubrication and a true reference surface while the cutter trims the outside of the neck.
Will neck turning actually help my accuracy?
For precision handloading, it can make a real difference. Turning evens out thick and thin spots in the case neck wall, which leads to more consistent neck tension and bullet release from one round to the next. That consistency is what helps tighten up groups, especially at longer distances.





Reviews
There are no reviews yet.