Description
A taper crimp is the right way to finish a .45 ACP round, and this die does exactly that one job well. It removes the flare left by the expander and squeezes the case mouth snug around the bullet while keeping a sharp edge at the mouth for proper headspacing. That matters in semi-autos, where the .45 ACP headspaces on the case mouth rather than a shoulder or rim. The result is ammo that drops into the chamber and feeds through the magazine without hiccups.
What the Hornady .45 ACP Taper Crimp Die Brings to the Bench
Most .45 ACP bullets are plain-based with no cannelure, which is why a taper crimp beats a roll crimp here. Roll crimping a non-cannelure bullet can bulge the case and actually hurt feeding and headspace, while a taper gently closes the mouth without biting into the bullet. The die cuts off the belled mouth and leaves that clean, rounded profile auto-pistols want to see. It covers .45 ACP and .45 Auto Rim, so revolver loads in that family are on the table too.
Fitting the Hornady Taper Crimp Die Into Your Setup
This is a standard 7/8-14 threaded die, so it threads into any common single-stage or progressive press and plays nice with Hornady's Lock-N-Load bushing system. It ships with a Hornady Sure-Loc locking ring, the split-clamp style that holds your crimp setting without the set screw chewing into the threads. Reloaders running a standard Hornady 3-die pistol set often add this as a dedicated fourth-station crimp die so seating and crimping happen in separate steps, which makes dialing in the crimp a lot easier and more repeatable.
Why Reloaders Reach for the Hornady .45 ACP Taper Crimp Die
Built from hardened steel for a long service life at the bench, this is a straightforward, do-one-thing-right tool. If you've chased feeding gremlins in a 1911 or any .45 auto, a proper taper crimp is often the fix. It's a smart upgrade for anyone who wants consistent, flawless chambering out of their handloads.
Key Specifications
- Caliber: .45 ACP / .45 Auto Rim
- Die Type: Taper Crimp
- Number of Dies: 1
- Thread Size: 7/8"-14
- Material: Hardened steel
- Locking Ring: Hornady Sure-Loc included
- Shellholder Included: No
- Storage Box Included: Yes
- Manufacturer: Hornady
- Manufacturer Part Number: 044172
- UPC: 090255441727
What’s Included
- Hornady .45 ACP taper crimp die
- Hornady Sure-Loc die locking ring
- Storage box
Frequently Asked Questions
Why use a taper crimp die for .45 ACP instead of a roll crimp?
The .45 ACP headspaces on the case mouth, so you need that mouth to stay sharp and square. A roll crimp rolls the edge over, which can mess up headspace and feeding, especially since most .45 bullets have no cannelure to roll into. This taper crimp die closes the mouth gently around the bullet while keeping the edge clean, which is exactly what semi-autos want.
Does the Hornady .45 ACP taper crimp die fit my press?
Yes, it uses the standard 7/8-14 die thread, so it threads into any common single-stage or progressive press. It also works with Hornady's Lock-N-Load bushing conversion. The included Sure-Loc ring locks your crimp setting in place between sessions.
Can I add this die to my existing Hornady 3-die pistol set?
Absolutely, that's one of the most popular uses for it. Adding a dedicated crimp die lets you separate the seating and crimping steps instead of doing both in one die, which makes it much easier to fine-tune the crimp. Many reloaders run it in a fourth station on a progressive press for exactly this reason.
What calibers does this die work with?
It's set up for .45 ACP and .45 Auto Rim. That makes it handy for both your auto-pistol loads and .45 Auto Rim revolver rounds that use the same bullet diameter and case family.





Reviews
There are no reviews yet.