0
0

Hornady Single Seating Die PC044157 .300 PRC Series I Bullet Seater

UPC: 090255441574

$29.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .300 PRC rewards careful handloading, and the seating step is where a lot of your accuracy gets won or lost. This Hornady PC044157 is the standalone bullet seating die for the cartridge, serving as the seating half of Hornady's Series I two-die rifle setup. If you already run a Series I sizer or picked up a set and need a replacement seater, this is the piece that drops right in.

The heart of this die is Hornady's In-line Bullet Seating System. A floating sleeve holds the bullet, case neck, and seating stem in alignment before the bullet enters the neck, which cuts down on runout and keeps base deformation from creeping into your loads. That alignment sleeve comes standard here, a feature some other makers charge extra for. You also get a seater adjustment screw with a lock ring and rubber washer, giving you the tension needed for fine seating depth tweaks that hold their setting.

Why the PC044157 Earns Its Spot on the Bench

Cleanup and maintenance were clearly on the mind when this one was designed. A retainer ring near the base pops out in seconds so you can break the die down, wipe out any brass shavings or lube buildup, and get it back together without a fuss. The die uses standard 7/8-14 threads, so it threads into any common reloading press without adapters.

Building Toward a Micrometer Setup

This is a roll crimp seater that runs the standard bullet seating stem out of the box. If you want to chase even finer adjustments down the road, Hornady's Micrometer Seating Stem drops in to turn it into a micrometer die, and the appropriate seater stems let it play nicely with bullet shapes like the A-Max and FTX lines. The .300 PRC is a long, heavy-for-caliber round built for distance, and reloaders consistently report good results running Hornady glass-smooth dies for it.

Whether you're loading match-grade rounds for a long-range rig or topping off hunting ammo for a magnum-length build, this seater handles the job that sends your bullets home straight.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 044157
  • UPC: 090255441574
  • Cartridge: .300 PRC
  • Die Type: Bullet Seating Die
  • Die System: Series I Custom Grade New Dimension
  • Number of Dies: 1 (single seating die)
  • Crimp Style: Roll crimp
  • Thread Size: 7/8-14
  • Shell Holder Included: No
  • Storage Box Included: Yes
  • Shipping Weight: 0.67 lb

What’s Included

  • In-line bullet seating die with Sure-Loc lock ring
  • Standard bullet seating stem
  • Storage box

Frequently Asked Questions

Is the Hornady PC044157 a full die set or just the seating die?

This is a single bullet seating die only, not a complete set. It serves as the seating half of Hornady's Series I two-die rifle system and is meant to pair with a separate .300 PRC sizing die. Pick it up if you need a replacement seater or already own the matching sizer.

What makes this .300 PRC seating die worth it over a basic seater?

The standout feature is the floating alignment sleeve that lines up the bullet, case neck, and seating stem before the bullet enters the case. That alignment reduces runout and keeps base deformation out of your loads, which pays off in tighter groups. Some competitors charge extra for a sleeve like this one, but it comes standard here.

Can I turn the PC044157 into a micrometer seating die?

Yes. The die runs the standard seating stem out of the box, but you can add Hornady's Micrometer Seating Stem, sold separately, to convert it into a micrometer seater for repeatable, finely dialed seating depth. The appropriate seater stems also let it work with bullet profiles like the A-Max and FTX lines.

Will this seating die fit a standard reloading press?

It uses standard 7/8-14 threads, so it fits any common single-stage or progressive press that accepts that threading. No adapters or special hardware are needed to get it running.

Additional information

UPC

090255441574

Manufacturer

Manufacturer Part Number

044157

Shipping Weight

0.67

Reviews

There are no reviews yet.

Be the first to review “Hornady Single Seating Die PC044157 .300 PRC Series I Bullet Seater”