Description
If you're loading .300 PRC and want brass that chambers clean every time, this Hornady Custom Grade full-length sizer die is the workhorse that gets you there. It resizes the entire case back toward factory specs, bumps the shoulder, deprimes, and sets the neck tension all in one pass. The internal finish is some of the smoothest you'll find, which translates to easier handle pulls and more uniform brass from one firing to the next.
What Sets This .300 PRC Sizer Die Apart
The standout here is the Zip Spindle. Instead of the old friction-fit spindle that loves to slip the moment you tighten it down, Hornady cut a series of light threads into the spindle and collet so it locks positively and stays put. Adjusting decap depth or snugging the lock is painless. Paired with that is the elliptical expander, a smarter take than the traditional ball expander. It draws through the neck with less drag, which means noticeably less case neck stretch and longer brass life for your expensive .300 PRC cases.
Built to Take the Punishment
The decapping pin is hardened steel, so it won't bend or snap even when you're punching out crimped primers. The die body threads are standard 7/8-14, so it drops right into any common single-stage or progressive press. It ships with a Hornady Sure-Loc lock ring that clamps around the full circumference of the die body, holding your setting rock-steady instead of biting into one spot and throwing off your adjustment.
Fitting It Into Your .300 PRC Workflow
This is the single sizing die, not a full two-die set, so you'll pair it with a seating die to finish your rounds. It's a great pick if you already run a Hornady seater or want to mix and match. Made in the USA and backed by Hornady's no-risk lifetime warranty, it's a buy-once tool for the long haul. Keep in mind a shell holder is not included, so grab the correct one if you don't already have it.
Key Specifications
- Caliber: .300 PRC
- Die Type: Full-Length Sizer
- Number of Dies: 1
- Thread Size: 7/8"-14
- Spindle: Zip Spindle
- Expander: Elliptical Expander
- Decap Pin: Hardened Steel
- Lock Ring: Sure-Loc
- Shell Holder Included: No
- Storage Box Included: Yes
- Warranty: Lifetime
- Country of Origin: USA
- Manufacturer: Hornady
- Manufacturer Part Number: 046334
- UPC: 090255463347
What’s Included
- Full-Length Size Die (.300 PRC)
- Sure-Loc Lock Ring
- Elliptical Expander
- Headed Decap Pin
- Zip Spindle
- Plastic Storage Box
Frequently Asked Questions
Is this the complete two-die set or just the sizer die?
This is the single full-length sizer die only. To load complete .300 PRC rounds you'll also need a seating die. If you want both in one package, Hornady offers a two-die set, but this listing is the standalone sizer.
Does the Hornady .300 PRC sizer die come with a shell holder?
No, a shell holder is not included with this die. You'll need the correct shell holder for the .300 PRC case head to run it in your press. If you don't already have one, pick it up separately.
What is the Zip Spindle and why does it matter?
The Zip Spindle uses a series of light threads cut into the spindle and collet so it locks positively instead of relying on friction. This eliminates the spindle slippage that plagues older designs and makes depth adjustments quick and secure. It's a feature across Hornady's Custom Grade full-length sizing dies.
Will this die fit a standard reloading press?
Yes, it uses the industry-standard 7/8-14 thread, so it threads into virtually any common single-stage or progressive press. The included Sure-Loc ring clamps around the full die body to hold your setting in place once you've dialed it in.





Reviews
There are no reviews yet.