Description
If you're loading 9mm Luger or 9×21 on a single-stage or progressive press, this Hornady Custom Grade Series II set covers the full handgun cartridge cycle in three dies. It handles sizing, case mouth expansion, and bullet seating with a taper crimp, and it fits the standard 7/8"-14 thread used across Hornady presses and most other brands. Bullet diameter is .355", and the set uses a #8 shell holder, which is sold separately.
What Sets This Hornady Taper Crimp Set Apart
The full-length sizing die wears Hornady's titanium nitride "gold ring" finish. That coating is harder than carbide, which means you can resize soft pistol brass without case lube and without scratching your cases. Less friction also stretches out brass life, which adds up fast when you're loading 9mm in any kind of volume. The sizing die runs the Zip-Spindle design too, so it locks positively to kill slippage, and the light threads on the spindle and collet let you dial in small adjustments or zip it up and down for bigger moves.
Seating and Crimping in One Pull
The taper crimp seater is the real workhorse here. It seats the bullet and applies the taper crimp in a single step, so you skip the separate crimp die a lot of other setups require. The taper crimp removes the flare from the case mouth and squeezes it back around the bullet while keeping a clean edge for proper headspace, which matters since 9mm headspaces off that case mouth. A built-in alignment sleeve keeps everything running straight, a feature Hornady includes standard where some competitors charge extra for it.
Built to Last in the Hornady Custom Grade Line
These dies are machined and polished to a smooth internal finish for consistent feeding without sticking. The whole set ships in a stackable storage box that keeps your dies organized on the bench, and it's backed by Hornady's reputation for building gear meant to run for years of reloading.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546516
- UPC: 090255565164
- Caliber: 9mm Luger / 9x21mm IMI (.355")
- Product Type: 3-Die Set
- Series: Custom Grade Series II
- Die Functions: Full-Length Sizer, Pistol Expander, Taper Crimp Seater
- Crimp Style: Taper
- Sizing Ring: Titanium Nitride (no lube required)
- Spindle: Zip-Spindle
- Thread Size: 7/8"-14
- Shell Holder: #8 (sold separately)
- Material: Steel
- Country of Origin: USA
What’s Included
- Full-length sizing die with titanium nitride ring and Zip-Spindle
- Pistol-style expander die
- Taper crimp seating die
- Sure-Loc lock rings
- Stackable plastic storage box
Frequently Asked Questions
Do I need case lube with the Hornady 9mm taper crimp die set?
No, you don't. The full-length sizing die uses a titanium nitride gold ring finish that's harder than carbide and runs lube-free on pistol brass. That coating keeps cases from sticking and won't scratch them, which also helps your brass last longer.
Is a shell holder included with this die set?
No, the shell holder is sold separately. This set uses a #8 shell holder for 9mm Luger and 9×21. You'll want to grab one if you don't already have it on the bench.
Does this set need a separate taper crimp die?
No. The taper crimp seater seats the bullet and applies the taper crimp in one step, so there's no extra crimp die needed. That taper crimp cleans up the case mouth flare while keeping a sharp edge for proper headspace.
Will these dies fit my press?
Yes, they use the standard 7/8"-14 thread, so they'll thread into Hornady Lock-N-Load presses as well as most other single-stage and progressive presses on the market. If your press takes standard dies, this set will work.




Reviews
There are no reviews yet.