Description
Three of the most popular revolver cartridges, one die set. The Hornady Series II Handgun 3-Die Set handles .38 Special, .357 Magnum, and .357 Remington Maximum, which makes it a smart pickup if you shoot any combination of those rounds. Since all three share the same .357 bullet diameter, one set keeps your bench simpler and your reloading dialed in across the whole lineup.
This is a true Custom Grade set from Hornady, and the craftsmanship shows. The full-length sizing die brings cases back to SAAMI minimum specs for reliable chambering, the pistol-style expander opens the case mouth to accept a bullet without overworking the brass, and the seater die sets your bullet with a built-in crimp option so you can seat and crimp in one step if you want. A retainer ring near the base of the seater pops off in seconds, so cleaning and maintenance take no time at all.
What Sets the Series II Dies Apart
The internal finish is where these earn their keep. Hornady machines and polishes the inside of each die to a slick surface that keeps brass moving smoothly and resists sticking. The Zip Spindle design takes the fight out of spindle adjustments, so you can fine-tune without the usual knuckle-busting, and Sure-Loc lock rings clamp around the entire die body to hold your settings put once you've got them where you want.
Running the .38/.357/.357 Max Set on Your Press
These dies thread into any standard 7/8-14 reloading press, so they'll drop right into the setup most handloaders already own. If you're running a modern Hornady press with the Lock-N-Load bushing system, grab a set of die bushings to make swapping between calibers quick. Hornady backs these with a reputation built on machined quality, and that holds true whether you're loading light .38 plinking rounds or stepping up to full-house .357 Magnum and .357 Max loads.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546527
- UPC: 090255565270
- Caliber: .38 Special / .357 Magnum / .357 Remington Maximum
- Die Series: Series II (Custom Grade)
- Product Type: 3-Die Set
- Dies In Set: 3 (Sizer, Expander, Seater)
- Thread: 7/8-14 (standard press compatible)
- Spindle System: Zip Spindle
- Lock Rings: Sure-Loc
- Shipping Weight: 1.85 lbs
What’s Included
- Full-Length Size Die
- Pistol-Style Expander Die
- Seater Die with built-in crimp option
- Sure-Loc lock rings
- Zip Spindle with spindle lock
- Decap pin retainer and headed decap pins
Frequently Asked Questions
Does the Hornady Series II 3-Die Set cover all three calibers?
Yes. This set loads .38 Special, .357 Magnum, and .357 Remington Maximum. All three use the same .357 bullet diameter, so a single set of dies handles the whole family without needing separate tooling for each cartridge.
Will these dies fit my reloading press?
They use the industry-standard 7/8-14 thread, so they'll fit single-stage and progressive presses from the major brands. If you're running a Hornady Lock-N-Load press, you'll want the matching die bushings to make caliber changes quick and repeatable.
Can I seat and crimp in one step with this set?
You can. The seater die has a built-in crimper, so you have the option to seat the bullet and apply a crimp in the same operation. That's handy for revolver rounds where a solid crimp helps keep bullets from walking under recoil.
What makes the Series II different from a basic die set?
The Series II dies feature a precision-polished internal finish, the Zip Spindle for smoother adjustments, and Sure-Loc lock rings that clamp around the full die body to hold your settings. The seater's retainer ring also removes in seconds for fast cleaning and maintenance.




Reviews
There are no reviews yet.