Description
The Hornady Match Grade Full Length Die in 6mm GT is built for the handloader who wants to fine-tune neck tension instead of settling for whatever a standard die gives them. This is a single full length sizing die that works the full body of the case while letting you set neck tension with your choice of interchangeable bushing. For precision rifle folks running the 6mm GT, that level of control is exactly what separates good brass prep from great brass prep.
What Sets the 6mm GT Match Grade Die Apart
The heart of this die is the self-centering bushing system. Instead of a fixed neck diameter, you drop in a bushing sized to the neck tension you want, which means you only size the neck as much as you need and no more. That keeps you from overworking your brass, stretches case life, and helps every round sit the same way. The die also runs an elliptical expander on the spindle to cut friction and reduce case-neck stretch as the brass comes back out, plus a headed decap pin to knock out spent primers in the same stroke. A knurled spindle lock makes swapping bushings quick when you want to change tension, and the O-ring spindle tensioner holds your setting once you've got it where you like it.
Setting Up the Hornady 6mm GT Full Length Die
This die uses the standard 7/8"-14 thread, so it threads right into any common single-stage or progressive press. It ships with a Hornady Sure-Loc lock ring and a storage box to keep it protected on the bench between sessions. Keep in mind the neck bushing and shellholder are purchased separately, which is normal for the Match Grade line since it lets you pick the exact bushing diameter for your brass and load. To find your bushing, measure the neck diameter of a loaded or dummy round and subtract roughly .001" to .002" for proper tension. Hornady offers bushings in small increments so you can land right where you want to be.
For anyone chasing accuracy with the 6mm GT, a cartridge that's earned a strong following in competition circles, this die is a smart building block for a repeatable, match-focused reloading process.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 046600
- UPC: 090255466003
- Caliber: 6mm GT (.243)
- Die Type: Full Length Sizing (bushing style)
- Number of Dies: 1
- Series: Match Grade
- Thread: 7/8"-14
- Bullet Diameter: .243"
- Neck Bushing: Sold separately
- Shellholder: Not included
- Country of Origin: United States
- Shipping Weight: 0.25 lbs
What’s Included
- Match Grade full length sizing die (bushing style)
- Sure-Loc lock ring
- Elliptical expander with headed decap pin
- Plastic storage box
Frequently Asked Questions
Does the Hornady 6mm GT Match Grade Full Length Die come with a neck bushing?
No, the neck bushing is sold separately. This is standard across the Match Grade line because it lets you pick the exact bushing diameter for your brass and desired neck tension. To find the right size, measure a loaded round's neck diameter and subtract about .001" to .002".
Is this a complete die set or a single die?
This is a single full length sizing die, not a two-die set. If you also need to seat bullets, you'll want to add a seating die to complete your 6mm GT setup.
Will this die fit my press?
Yes. It uses the standard 7/8"-14 thread, so it threads into any common single-stage or progressive press. Keep in mind a shellholder is not included and is purchased separately.
Why choose a bushing die over a standard full length die for 6mm GT?
A bushing die lets you set neck tension precisely by swapping bushings, so you size the neck only as much as needed. That reduces overworking the brass, extends case life, and helps produce the consistent, concentric ammo that precision 6mm GT loads call for.




Reviews
There are no reviews yet.