Description
This is the .365" bushing from Hornady's Match Grade system, a small part that carries a lot of weight when you're chasing consistency at the bench. The bushing is self-centering inside the die body and determines exactly how much the case neck gets squeezed down. Pick the right size for your brass and you control neck tension directly, which is one of the biggest levers you have when you're trying to shrink group sizes.
How the .365" Match Grade Bushing Works
The diameter stamped on the bushing is the inside dimension, and that number sets your finished neck size once the case is run into the die. A common starting point is measuring the neck diameter of a loaded round and subtracting about .001", which lands you close to the right bushing for proper tension. Because you're only sizing the neck down the amount you choose, you're not overworking the brass the way a standard die can, and less working means longer case life and better uniformity round to round.
Fitment for Your Hornady Match Grade Dies
This bushing is designed to drop into Hornady Match Grade dies, and it works in both the neck sizing and full-length bushing die bodies. In the full-length die, the case body gets sized and the shoulder bumped while the bushing handles the neck. In the neck die, it sizes the neck and bumps the shoulder without touching the body. Bushings in this lineup come in small increments, so a lot of handloaders keep a few on hand to fine-tune tension as they develop a load.
Why Reloaders Reach for the .365" Bushing
The appeal here is simple: tight tolerances at the press translate into tighter groups downrange. If you're loading for a cartridge that lands in the .365" neck range and you already run the Match Grade system, this is the piece that lets you tune neck grip to your exact brass and bullet combo. It's a precision part made for folks who care about the details.
Key Specifications
- Diameter: 0.365 in
- Type: Interchangeable neck sizing bushing
- Design: Self-centering
- Compatibility: Hornady Match Grade neck and full-length dies
- Gun Type: Rifle
- Quantity: 1
- Manufacturer: Hornady
- Manufacturer Part Number: 594365
- UPC: 090255593655
- Country of Origin: United States
What’s Included
- One Hornady Match Grade .365" neck sizing bushing
Frequently Asked Questions
What does the .365" measurement on the Hornady Match Grade Bushing refer to?
The .365" is the inside diameter of the bushing, which sets the finished size of your case neck once the brass is run into the die. To find the right bushing, measure the neck diameter of a loaded round and subtract roughly .001" as a starting point. From there you can adjust up or down to fine-tune your neck tension.
Which dies does this bushing fit?
It fits Hornady Match Grade dies and works in both the neck sizing and full-length bushing die bodies. The bushing is self-centering inside the die body, so it aligns on its own as the case passes through. It is not included with the dies and is purchased separately.
Does using a bushing really help case life?
Yes. Because you only size the neck down the amount the bushing dictates, you avoid overworking the brass the way a one-size die can. Less working of the metal means longer case life and more consistent neck tension from one round to the next.
Should I buy more than one bushing size?
A lot of handloaders keep a couple of nearby sizes on hand since the bushings come in small increments. That lets you experiment with neck tension during load development without being locked into a single dimension. If you're serious about tuning accuracy, having a few options makes the process easier.



Reviews
There are no reviews yet.