0
0

Hornady Match Grade Bushing .364 in Neck Sizing Bushing 594364

UPC: 090255593648

$23.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady Match Grade Bushing in .364 is the small piece that makes bushing dies worth owning. Instead of squeezing every case neck down to SAAMI minimum and springing it back out with an expander, you pick the exact inside diameter that gives you the neck tension you're after. The result is less brass working, more consistent seating, and the kind of concentricity that shows up on paper. This is the .364 diameter insert, part number 594364, sold as a single bushing.

How the .364 Match Grade Bushing Works in Your Die

The bushing is self-centering inside the die body, so it floats into alignment with the case neck rather than fighting it. Drop it into a Hornady Match Grade full-length or neck sizing die, and the inside diameter you chose sets the finished neck size. A common way to land on the right number is to measure the outside neck of a loaded round and subtract about .001 to .002 inches to account for brass springback. Because case neck wall thickness varies by brass brand, it's worth measuring the exact brass you plan to run before committing to a size.

Dialing In Neck Tension with the .364 Bushing

Hornady offers these bushings in tight increments so you can fine-tune tension rather than settle for close enough. A lot of reloaders keep one or two sizes above and below their target on the bench, since a different lot of brass or a switch in bullets can nudge your ideal diameter. Getting neck tension right is one of the biggest levers you have for consistent velocity and repeatable groups.

Cross-Compatibility of the Hornady .364 Bushing

One of the nicer perks is that this bushing isn't locked to Hornady dies. It shares the same standard external dimensions used by Redding, RCBS, and L.E. Wilson bushing-style dies, so it interchanges freely across those systems. If you already run a mixed bench of precision gear, this .364 insert slots right in without any adapters or fuss.

Key Specifications

  • Manufacturer: Hornady
  • Model: Match Grade Bushing
  • Manufacturer Part Number: 594364
  • UPC: 090255593648
  • Bushing Inside Diameter: 0.364 in
  • Type: Neck Sizing Bushing
  • Finish: Polished Steel
  • Quantity: 1 Bushing
  • Design: Self-Centering, Interchangeable
  • Fits: Hornady Match Grade Full-Length & Neck Sizing Dies
  • Cross-Compatible With: Redding, RCBS, L.E. Wilson Bushing Dies
  • Application: Rifle Cartridge Reloading
  • Shipping Weight: 0.25 lb

What’s Included

  • 1 Hornady Match Grade .364 in neck sizing bushing (PN 594364)

Frequently Asked Questions

What die does the Hornady Match Grade .364 bushing fit?

It's built for Hornady Match Grade full-length and neck sizing dies, dropping in as a self-centering insert. The .364 diameter is the inside dimension that sets your finished neck size. Note the bushing is sold separately and is not included with the die itself.

How do I know if .364 is the right bushing size for my brass?

Measure the outside neck diameter of a loaded round with your calipers, then subtract roughly .001 to .002 inches to allow for brass springback. That gives you a solid starting point for neck tension. Since neck wall thickness changes between brass brands, measure the exact brass you'll be loading.

Will the Hornady .364 bushing work in Redding, RCBS, or Wilson dies?

Yes. This bushing uses the standard external dimensions shared across Redding, RCBS, and L.E. Wilson bushing-style dies, so it interchanges between those systems with no adapters. Forster dies use a different design and are the main exception.

Why use a bushing instead of a standard sizing die?

Standard dies size the neck down to SAAMI minimum and then reopen it with an expander, which works the brass harder than many rifles need. A bushing lets you size only as much as your chamber and brass require, reducing overworking and improving concentricity. Less work on the neck often translates to more consistent velocity and tighter groups.

Additional information

UPC

090255593648

Manufacturer

Manufacturer Part Number

594364

Shipping Weight

0.25

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade Bushing .364 in Neck Sizing Bushing 594364”