Description
This is the .332 bushing for Hornady's Match Grade die system, made for handloaders running .30 caliber cartridges like the .308 Winchester. It drops into either the full-length or neck sizing Match Grade die and gives you direct control over how much you squeeze the case neck. Instead of sizing to a fixed SAAMI minimum every time, you pick the bushing diameter that matches your brass, your chamber, and the neck tension you actually want.
Why the .332 Match Grade Bushing Matters for Neck Tension
The idea here is simple but effective. Standard dies size the neck down more than most rifles need, which works the brass hard and shortens its life. This bushing lets you size only as much as necessary. To pick your size, measure the neck diameter of a loaded round that fits your chamber well, then subtract about .001 inch, and that points you to the right bushing. The .332 falls into the range commonly used for .308 Win, alongside the .334, .336, and .338 sizes, so a lot of precision reloaders keep a few on hand to fine-tune.
How the .332 Bushing Fits Your Hornady Setup
The bushing is self-centering, which keeps things aligned as the case moves through the die and helps your loaded rounds come out straighter and more concentric. Bushings come in tight .002 inch increments across the lineup, so you can step up or down to chase the exact tension your load likes. Keep in mind this is a single bushing, not a die, so you'll need a Hornady Match Grade neck or full-length die for it to work.
For anyone loading match ammo or just trying to get more reloads out of quality brass, this is one of those small parts that makes a real difference downrange. Tighter tolerances at the press tend to show up as tighter groups on paper.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 594332
- UPC: 090255593327
- Bushing Diameter: .332 in
- Caliber: .30 Caliber
- Common Use: .308 Winchester
- Type: Interchangeable Neck Sizing Bushing
- Design: Self-centering
- Size Increments: .002 in
- Compatibility: Hornady Match Grade full-length and neck sizing dies
- Quantity: 1
What’s Included
- One Hornady Match Grade .332 neck sizing bushing
Frequently Asked Questions
What is the Hornady Match Grade Bushing .332 used for?
It sets the neck tension when reloading .30 caliber cartridges, most commonly the .308 Winchester. The .332 inside diameter determines how much the case neck gets sized down. Choosing a bushing close to your ideal size means you work the brass less and get more consistent tension round to round.
Does this bushing work in both the neck and full-length Match Grade dies?
Yes. The bushing is interchangeable and drops into both the Hornady Match Grade full-length sizing die and the neck sizing die. Just note that the die itself is sold separately, since bushings do not come included with the die.
How do I know if the .332 is the right size for my brass?
Measure the neck diameter of a loaded round that chambers well in your rifle, then subtract about .001 inch to find your target bushing size. The .332 sits in the range many .308 shooters use, along with the .334, .336, and .338. Since bushings come in .002 inch steps, a lot of reloaders keep a couple sizes on hand to dial things in.
Why choose a bushing over a standard sizing die?
Standard dies size necks down to SAAMI minimum, which often squeezes more than your rifle actually needs and wears out brass faster. A bushing lets you size only as much as necessary for proper bullet grip. That tighter control tends to translate into straighter, more concentric ammo and better groups.





Reviews
There are no reviews yet.