Description
This is the .310 inch bushing for Hornady's Match Grade die system, and while it's a small piece of steel, it's the part that gives you real control over neck tension. Rather than sizing a neck all the way down to SAAMI minimum and then dragging an expander ball back through it, a bushing sizes the outside of the neck to the exact diameter you pick. That means less working of the brass, more consistent tension round after round, and tighter groups when it counts. The polished steel bushing floats inside the die body so it self-centers on the case neck, which keeps everything aligned and takes the guesswork out of staying concentric.
Where the .310 Bushing Fits In
This bushing works in both the Match Grade Full Length die and the Match Grade Neck die. In the full length die it sizes the case body, bumps the shoulder, and sizes the neck all in one stroke. In the neck die it handles the neck and bumps the shoulder without touching the body. The Match Grade dies are sold separately, and the bushings are offered in .002 inch increments across a wide range of sizes, so you can fine tune for whatever cartridge and brass you're running.
Picking the Right Bushing Size
The standard approach is to measure the outside neck diameter of a loaded round with a micrometer, then subtract about .002 inch for your desired neck tension. Brass springs back a touch after sizing, so plenty of reloaders keep a couple sizes on hand, one at their calculated number and one a thousandth smaller, to land on the tension that shoots best. Keep in mind bushing sizing is at its best with brass that has uniform neck wall thickness or has been neck turned.
Built for Repeatable Precision
For handloaders chasing accuracy, consistent neck tension is one of the biggest levers you can pull. This .310 bushing lets your press produce ammo with tight, repeatable tolerances, and because the system is self-centering, you're not fighting runout to get there. It's the kind of upgrade that quietly cleans up your groups without changing anything else on the bench.
Key Specifications
- Brand: Hornady
- Bushing Diameter: .310 inch
- Finish: Polished Steel
- Compatibility: Hornady Match Grade Full Length and Neck Sizing Dies
- Self-Centering: Yes
- Available Size Increments: .002 inch
- Gun Type: Rifle
- Quantity: 1 bushing
- Manufacturer Part Number: 594310
- UPC: 090255593105
- Shipping Weight: 0.025 lb
What’s Included
- One (1) Hornady Match Grade .310 diameter neck sizing bushing
Frequently Asked Questions
What dies does the Hornady Match Grade Bushing .310 work with?
It's made for the Hornady Match Grade die system and drops into both the Match Grade Full Length die and the Match Grade Neck die. The bushing is not included with the dies, so this is the piece you add to dial in your neck tension. Note that the dies themselves are sold separately from the bushing.
How do I know if the .310 bushing is the right size for my brass?
The common method is to measure the outside neck diameter of a loaded round with a micrometer and subtract about .002 inch for your desired neck tension. If that lands you around .310, this is your bushing. Since brass springs back slightly after sizing, many reloaders keep one size smaller on hand to fine tune their tension.
Does using a bushing really reduce how much the brass gets worked?
Yes. A bushing sizes only the outside of the neck down to the exact diameter you choose, instead of overworking it to SAAMI minimum and then opening it back up with an expander ball. Less working means your brass lasts longer and your neck tension stays more consistent from round to round.
Is this bushing self-centering?
It is. The bushing floats inside the die body and self-centers on the case neck as the brass enters the die, which helps keep everything concentric and consistent. That alignment is a big part of what makes the Match Grade system produce such repeatable results.




Reviews
There are no reviews yet.