Description
The Hornady Match Grade Bushing in .309 inch is one of those small parts that makes a real difference once you start chasing consistency in your handloads. It drops into a Hornady Match Grade bushing die and takes over the job of sizing the case neck, letting you control neck tension instead of leaving it up to a fixed die. Because the bushing is self-centering, it floats into position as the case comes up, which keeps things concentric and helps your bullets seat straight.
How the .309 Match Grade Bushing Works
The whole idea behind these bushings is giving you a say in how tight the neck grips the bullet. You pick the bushing based on your loaded neck diameter and your brass neck-wall thickness, then the die sizes down to just that measurement. A common starting point is to measure the outside diameter of a loaded round and subtract around .002 to .003, which accounts for brass spring back and leaves you with a workable amount of neck tension. Since bushings come in .001 inch steps, a lot of reloaders keep one size above and one below their target to fine-tune at the bench.
Why Reloaders Reach for the Hornady .309 Bushing
The payoff here is less overworked brass and more uniform bullet pull, which tends to show up as tighter groups downrange. A fixed die squeezes the neck way down and then the expander ball opens it back up, cold working the brass every cycle. This bushing only sizes the neck by the amount you choose, so your cases last longer and stay more uniform from firing to firing. It's a polished steel bushing built to Hornady's tight tolerances, so it performs the same every time it goes in the die.
Fitting the Match Grade Bushing to Your Setup
This .309 bushing works in both the Match Grade full-length sizing die and the shoulder-bump neck sizing die, and it also fits other common bushing-style dies that use the same standard bushing. Keep in mind the bushing is sold on its own and the die itself is a separate purchase. Slide it in with the size marking facing up, snug down the spindle lock, and you're ready to size.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 594309
- UPC: 090255593099
- Bushing Inside Diameter: .309 in
- Caliber Application: 7mm / .30 caliber neck sizing
- Type: Interchangeable self-centering neck size bushing
- Finish: Polished steel
- Quantity: 1
- Size Increments Available: .001 inch
- Compatibility: Hornady Match Grade full-length and neck sizing bushing dies
- Made in USA: Yes
- Shipping Weight: 0.025 lb
What’s Included
- One Hornady Match Grade .309 inch neck size bushing
Frequently Asked Questions
What die does the Hornady Match Grade .309 bushing fit?
It's designed for Hornady Match Grade bushing dies, including both the full-length sizing die and the shoulder-bump neck sizing die. It also works in other common bushing-style dies that accept the same standard bushing size. The bushing is sold separately, so you'll need the die itself to use it.
How do I know if the .309 bushing is the right size for my brass?
The right bushing depends on your loaded neck diameter and brass neck-wall thickness. A common method is to measure the outside diameter of a loaded round and subtract about .002 to .003 inch, which accounts for spring back and gives you a reasonable amount of neck tension. Many reloaders keep bushings one size above and below their target to dial things in.
What's the benefit of a bushing over a standard sizing die?
A standard die squeezes the neck way down and then opens it back up with an expander ball, which cold works the brass every cycle. This bushing only sizes the neck by the exact amount you choose, so you avoid overworking the brass and get more consistent neck tension. That consistency usually translates to tighter groups and longer case life.
Does this bushing include the die or come as a set?
No, this is a single .309 inch bushing only. The Match Grade die body is a separate purchase. Bushings are offered individually in .001 inch increments so you can build out exactly the sizes your loads call for.




Reviews
There are no reviews yet.