0
0

Hornady Match Grade Bushing .293″ Diameter – 594293 Neck Sizing

UPC: 090255592931

$23.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This .293" bushing is the piece that turns your Hornady Match Grade Bushing Die into a tuned tool for your specific brass. It drops into either the full-length sizing or shoulder bump neck size version of the die, and because it's self-centering, it keeps everything concentric as the neck passes through. That concentricity is a big part of why reloaders chase these bushings in the first place: tight, repeatable necks tend to show up as tighter groups downrange.

Where the .293" Bushing Fits In

At .293", this one lands in the 6.5mm / .264 caliber range, so it's a common pick for folks loading 6.5 Creedmoor, 6.5 PRC, .260 Remington, and similar cases. The whole point of a bushing system is that you're not locked into whatever neck dimension a standard die gives you. Swap the bushing and the die behaves differently, which lets you set neck tension to your taste instead of settling for the factory sizing.

Picking the Right Match Grade Bushing Size

Getting the size right is straightforward once you know the drill. Measure the outside diameter of the neck on a loaded or dummy round with a good micrometer, then subtract about .002" to .003" for your desired tension plus a touch for brass spring back. So if a loaded neck measures .295", a .293" bushing gives you roughly .002" of tension. Hornady offers these in fine increments, so it's smart to keep the sizes just above and below your target on hand while you're working up a load. Bolt guns can run light tension, while semi-autos usually want a bit more to hold the bullet under feeding.

Build Quality You Can Feel at the Press

Hornady holds tight tolerances on these bushings, and that consistency is what makes the Match Grade line worth running. By sizing the neck down by just the amount you choose, you avoid the excessive cold working that beats up brass and shortens case life. Mark-up faces up in the die so you can confirm the size at a glance, and swapping bushings takes seconds with the knurled spindle lock.

Key Specifications

  • Brand: Hornady
  • Product Type: Match Grade Neck Sizing Bushing
  • Bushing Diameter: .293 in
  • Caliber Application: 6.5mm / .264
  • Outer Body Size: .750 in diameter
  • Design: Self-centering, interchangeable
  • Compatibility: Hornady Match Grade Bushing Dies (full-length and shoulder bump neck size)
  • Quantity: 1 (sold individually)
  • Manufacturer Part Number: 594293
  • UPC: 090255592931

What’s Included

  • 1 Hornady Match Grade Bushing, .293" diameter

Frequently Asked Questions

What caliber is the Hornady Match Grade Bushing .293" used for?

The .293" diameter puts this bushing in the 6.5mm / .264 caliber range. It's a common choice for cartridges like 6.5 Creedmoor, 6.5 PRC, and .260 Remington. The exact bushing you need still depends on your brass neck thickness, so measure your loaded rounds before settling on a size.

How do I know if the .293" bushing is the right size for my load?

Measure the outside diameter of the neck on a loaded or dummy round with a micrometer, then subtract .002" to .003" for neck tension plus a little for spring back. If your loaded neck measures right around .295", this .293" bushing will give you roughly .002" of tension. It helps to keep a bushing a size up and a size down while you fine-tune.

Does this bushing work with any Hornady Match Grade die?

Yes. It fits both the full-length sizing and shoulder bump neck size versions of the Hornady Match Grade Bushing Dies. The bushing is sold separately from the die set, so you'll need the die itself to use it.

Why use a bushing instead of a standard neck sizing die?

A bushing lets you control exactly how much the neck gets sized down instead of being stuck with a fixed dimension. Sizing only the amount you need avoids overworking the brass, which extends case life and keeps necks more concentric. That consistency often translates to tighter groups at the range.

Additional information

UPC

090255592931

Manufacturer

Manufacturer Part Number

594293

Shipping Weight

0.025

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade Bushing .293″ Diameter – 594293 Neck Sizing”