0
0

Hornady Match Grade Bushing .283 in | Neck Sizing Bushing 594283

UPC: 090255592832

$23.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady Match Grade Bushing in .283 diameter is the small piece that lets you take real control over neck tension at the press. Drop it into a Hornady Match Grade bushing die and it sizes only the amount of neck you want, instead of squeezing everything down and then dragging it back open over an expander ball. Less working of the brass means longer case life and more consistent tension round to round, which is where accuracy actually lives.

What the .283 Hornady Match Grade Bushing Does on the Bench

The bushing floats inside the die rather than sitting locked in place, so it self-centers on the case neck as the round comes up. That free-floating design keeps the neck concentric and avoids the slight runout you can pick up from a fixed sizing setup. Because it only touches the neck, your shoulders and body stay put unless you're bumping the shoulder with a full-length version. This particular bushing measures .283 inch, part of Hornady's lineup that runs in .001 inch steps so you can fine-tune to your exact brass and bullet combo.

Picking the Right Size Alongside Your .283 Bushing

The standard approach is to measure the outside neck diameter of a loaded round and subtract .002 to .003 inch for the bushing you want. Brass springs back roughly .001 inch after sizing, so that math gets you to usable neck tension. If a loaded round in your brass mics right around .285 to .286, the .283 lands you in that two to three thousandths tension window most handloaders are after. A lot of precision guys keep a couple bushings on either side of their target so they can tune tension without guessing.

Where the Hornady .283 Bushing Fits

This insert is made for Hornady Match Grade bushing dies, available in both full-length sizing and shoulder-bump neck sizing styles. If you're running turned or consistent-thickness necks you'll get the most predictable results, since neck wall variation is what throws off tension with any bushing system. For anyone chasing tighter groups out of a bolt gun, it's a straightforward upgrade that pays off downrange.

Key Specifications

  • Brand: Hornady
  • Product Type: Match Grade Neck Sizing Bushing
  • Bushing Diameter: 0.283 in
  • Manufacturer Part Number: 594283
  • UPC: 090255592832
  • Design: Self-centering, free-floating
  • Material: Steel
  • Quantity: 1 bushing
  • Compatibility: Hornady Match Grade Bushing Dies
  • Size Increments: Available in 0.001 in steps

What’s Included

  • One (1) Hornady Match Grade Bushing, .283 in diameter

Frequently Asked Questions

What die does the Hornady Match Grade .283 bushing fit?

It's designed for Hornady Match Grade bushing dies, which come in full-length sizing and shoulder-bump neck sizing styles. Both styles use these interchangeable neck bushings. Drop the .283 insert into the die, set your spindle lock, and you're ready to size.

How do I know if .283 is the right bushing size for my load?

Measure the outside neck diameter of a loaded round with a caliper or micrometer and subtract .002 to .003 inch. That accounts for roughly a thousandth of brass spring-back and gets you the neck tension you want. If your loaded rounds mic around .285 to .286, the .283 bushing puts you right in the common two to three thousandths range.

Does using this Hornady bushing really help accuracy?

It can, mainly because a bushing sizes only the neck and works the brass less than a traditional die with an expander ball. Less working means more consistent neck tension round to round and longer case life. Tighter, more repeatable tension at the press tends to show up as tighter groups on target.

Do I need consistent neck wall thickness to get the most from this bushing?

Yes, uniform neck walls matter with any bushing system. Since the bushing sizes from the outside, variation in neck wall thickness carries through to inconsistent tension on the bullet. Neck-turned or consistent-thickness brass will give you the most predictable results, though many handloaders run it successfully without turning.

Additional information

UPC

090255592832

Manufacturer

Manufacturer Part Number

594283

Shipping Weight

0.01

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade Bushing .283 in | Neck Sizing Bushing 594283”