Description
The Hornady Match Grade Bushing in .282" is the small part that makes a big difference when you're chasing consistency. It drops into Hornady Match Grade Bushing dies and lets you size just the case neck to the exact tension you want, nothing more. That controlled sizing is what keeps your brass alive longer and your groups tighter, which is the whole reason precision handloaders run bushing dies in the first place.
What the .282" Hornady Match Grade Bushing Does
This is a self-centering, interchangeable neck sizing bushing. Because it floats and centers itself during the stroke, you avoid the oversizing and overworking that comes from one-size-fits-all expander setups. You pick your bushing based on your loaded neck diameter, typically measuring a loaded round and subtracting a couple thousandths to land on the right tension. The .282" size fits a specific slice of that range, so make sure it matches your brass and bullet combo before you commit.
Fitment and Cross-Brand Compatibility
One of the better things about this bushing is that it isn't locked to Hornady dies. The Match Grade Bushing is interchangeable with Redding, Wilson (L.E. Wilson), and RCBS bushing dies, since those brands all share the same common bushing form factor. If you already run a Type S style die or a Whidden setup, this bushing will seat right in. The main exception in the bushing world is Forster, which uses its own proprietary shape, so Hornady bushings won't fit those.
Why Reloaders Reach for the Match Grade Bushing
Neck tension is one of the biggest variables in load consistency, and swapping a bushing is the fastest, most repeatable way to control it. Hornady offers these in small increments so you can fine-tune instead of guess. Keep a few sizes on the bench and you can chase the node that shoots best in your rifle without changing anything else. It's an inexpensive part that pays off in the kind of repeatability that shows up on paper.
Key Specifications
- Manufacturer: Hornady
- Bushing Diameter: .282"
- Type: Neck Sizing Bushing
- Design: Self-Centering, Interchangeable
- Compatibility: Hornady, Redding, Wilson, and RCBS Bushing Dies
- Application: Rifle Cartridge Neck Sizing
- Manufacturer Part Number: 594282
- UPC: 090255592825
- Shipping Weight: 0.025 lb
What’s Included
- (1) Hornady Match Grade Bushing .282"
Frequently Asked Questions
What dies does the .282" Hornady Match Grade Bushing fit?
It's made for Hornady Match Grade Bushing dies, both the full-length and neck sizing styles. It's also interchangeable with Redding, L.E. Wilson, and RCBS bushing dies since they share the same common bushing form factor. The one exception is Forster, which uses a proprietary bushing shape.
How do I know if .282" is the right bushing size for my brass?
The usual method is to measure the neck diameter of a loaded round with a micrometer, then subtract two to three thousandths for your desired neck tension. That final number is the bushing size you want. Since neck wall thickness varies by brass brand, it's worth measuring your actual loaded rounds rather than going off published figures.
Why use a bushing instead of a standard sizing die?
A bushing lets you size only the neck to a precise amount instead of working it down and expanding it back up like a traditional die. That self-centering, controlled sizing reduces how much you overwork the brass, which extends case life and improves consistency. Dialing in neck tension this way is one of the simplest ways to tighten up your groups.
Can I buy multiple sizes to fine-tune my loads?
Yes, and a lot of precision handloaders do exactly that. Hornady offers these bushings in small increments so you can test different neck tensions and find what shoots best in your rifle. Keeping a few sizes on the bench makes it easy to experiment without changing anything else in your load.




Reviews
There are no reviews yet.