Description
Neck tension is one of those little details that separates so-so handloads from rounds that print tight groups, and the Hornady Match Grade Bushing in .281" is how you take control of it. This is a single interchangeable bushing that installs in your Hornady Match Grade bushing die and sizes the case neck down to the exact diameter you choose. Because it floats and self-centers inside the die, it keeps the neck concentric with the case body instead of pulling it off-axis the way a fixed one-size-fits-all sizing ball sometimes can.
How the .281" Bushing Earns Its Keep
The whole idea behind a bushing setup is that you only squeeze the neck as much as you actually need to. By picking the right diameter, you avoid oversizing the neck and then dragging it back open with an expander, which is what tires brass out and shortens its useful life. Hornady offers these in .001" steps across the range, so stepping up or down to fine-tune grip is easy. To land on the right size, measure the outside neck diameter of a loaded round and subtract about .002" to .003" to account for brass spring-back. That .281" lands in the .25 caliber neighborhood, but the loaded-round measurement is always the number that matters most.
Fits More Than Just Hornady Dies
One of the best things about this bushing is that it isn't locked to a single brand. Hornady, Redding, Wilson, and RCBS all share the same bushing dimensions, so a Hornady .281" bushing drops right into a Redding S-type die or an RCBS Gold Medal setup without any fuss. Forster is the odd one out and uses its own design, so plan around that. If you already own bushing dies from any of those four makers, this is a straightforward add to your bench.
For anyone running a bolt gun and chasing consistency, the payoff shows up on paper. Tighter, more repeatable tolerances at the press translate into tighter groups downrange, and a quality bushing like this is a small part that makes a real difference in how your loaded rounds shoot.
Key Specifications
- Brand: Hornady
- Product Type: Match Grade Neck Sizing Bushing
- Diameter: .281 in
- Quantity: 1 bushing
- Design: Self-centering, interchangeable
- Compatibility: Hornady, Redding, Wilson, and RCBS bushing dies
- Increment Availability: Offered in .001 in steps
- Manufacturer Part Number: 594281
- UPC: 090255592818
- Shipping Weight: 0.025 lb
What’s Included
- One Hornady Match Grade .281" neck sizing bushing
Frequently Asked Questions
What die does the Hornady Match Grade Bushing .281" work with?
It installs in Hornady Match Grade bushing dies, both the full-length sizing and neck sizing styles. It also fits Redding, Wilson, and RCBS bushing dies since all four brands share the same bushing dimensions. Forster uses its own design, so this bushing will not work in Forster dies.
How do I know if .281" is the right bushing size for my brass?
Measure the outside neck diameter of a loaded round, then subtract about .002" to .003" to allow for brass spring-back. The resulting number is your ideal bushing diameter. Many reloaders keep a size or two above and below their target on hand so they can fine-tune neck tension.
Does using a bushing really help brass last longer?
Yes. A bushing sizes only the neck and only as much as you choose, so you avoid oversizing and then re-opening the neck with an expander. That reduces how much you work the brass, which helps extend case life while keeping neck tension consistent.
Is this a complete die or just the bushing?
This is just the single .281" bushing. It is the interchangeable insert that goes inside a Match Grade or compatible bushing die, so you will need the die itself to use it. If you already run a bushing-style sizing die, this drops right in.



Reviews
There are no reviews yet.