Description
The Hornady Match Grade Bushing in .280" diameter is the small part that makes a big difference in a precision reloading setup. Instead of a fixed-diameter sizing die that squeezes the neck down and then opens it back up with an expander ball, a bushing die lets you pick the exact neck diameter you want. Drop in this .280" bushing and you control neck tension directly, which is one of the biggest levers for consistent bullet seating and repeatable accuracy at the target.
Where the .280" Match Grade Bushing Fits In
This bushing is designed to run in Hornady Match Grade Bushing Dies, and it also works with common bushing-style neck sizing die systems from other makers. The self-centering design keeps the bushing floating in the die so it aligns itself to the case neck as it enters, which helps keep runout low and tension even all the way around. Hornady offers these in small increments, so you can fine-tune down to the thousandth once you know your numbers.
Choosing the Right Bushing Size
Picking the right bushing comes down to measuring, not guessing. The common method is to seat a bullet in the exact brass you plan to load, measure the loaded neck outside diameter with a good caliper, then subtract your desired neck tension to land on your bushing size. Most handloaders run somewhere around .002" to .003" of tension, and many size a touch smaller to account for brass springback. Keep in mind that different brass brands have different neck wall thickness, so a bushing that gives perfect tension with one headstamp may read differently with another.
Why Reloaders Reach for Match Grade Bushings
Sizing the neck only as much as needed means you work the brass less, which keeps it in service longer and helps tension stay consistent from load to load. That translates into better bullet release and tighter groups when the rest of your process is dialed in. It's a simple, well-machined piece of kit that earns its spot in any precision rifle reloading bench.
Key Specifications
- Brand: Hornady
- Bushing Diameter: .280 in
- Type: Neck Sizing Die Bushing
- Design: Self-centering, interchangeable
- Intended Use: Bushing-style neck sizing dies
- Quantity: 1 bushing
- Manufacturer Part Number: 594280
- UPC: 090255592801
- Country of Origin: Made in USA
What’s Included
- One (1) Hornady Match Grade .280" neck sizing bushing
Frequently Asked Questions
What die does the .280" Hornady Match Grade Bushing work with?
It's made to run in Hornady Match Grade Bushing Dies, which come in full-length sizing and shoulder bump neck sizing styles. It's also compatible with common bushing-style neck sizing die systems from other manufacturers. The bushing floats in the die and self-centers on the case neck as it enters.
How do I know if the .280" is the right bushing size for me?
Seat a bullet in the brass you plan to load, measure the loaded neck outside diameter with a caliper, then subtract the neck tension you want to find your bushing size. A .280" bushing is a common choice for cartridges whose loaded neck measures around .282" to .283" when you're after a couple thousandths of tension. Remember that brass brand and neck wall thickness affect the final number, so measure the exact brass you'll be loading.
Does using a bushing really help brass last longer?
Yes. A bushing sizes the neck only as much as you need instead of squeezing it way down and opening it back up with an expander ball. Working the brass less keeps necks from hardening as quickly and helps tension stay consistent from load to load.
How much neck tension should I aim for with this bushing?
Most precision handloaders settle somewhere around .002" to .003" of tension, though some benchrest shooters go lighter. Since brass springs back slightly after sizing, you'll often pick a bushing a thousandth smaller than your raw math suggests. The best approach is to test a couple of sizes and see which gives you the tightest, most consistent groups.




Reviews
There are no reviews yet.