Description
This is the .270" bushing for Hornady's Match Grade bushing die system, the small but mighty piece that lets you control exactly how much your case necks get worked during resizing. Instead of forcing every neck down to one fixed dimension, you pick the bushing that matches your brass neck thickness and the tension you're after. That control is what separates ammo that shoots and ammo that chases the X-ring.
Why the .270 Match Grade Bushing Earns Its Keep
The bushing is self-centering and floats inside the die, which keeps everything aligned as the neck passes through. That alignment is the whole point. It takes the guesswork out of neck sizing and keeps you from oversizing your necks or overworking the brass, which means longer case life and more consistent neck tension round to round. Hornady offers these in tight increments, so if the .270 is a touch snug or loose for your particular brass, a neighboring size gets you dialed. Bushing choice comes down to your measured loaded neck diameter, typically sizing a couple thousandths under that.
Picking the Right Size Hornady Match Grade Bushing
Measure a loaded round at the neck, then subtract for your desired tension. The .270 lands in the 6mm and 6.5mm neighborhood depending on brass, but your calipers make the final call rather than the cartridge name on the box. Reloaders chasing small groups usually keep a few adjacent bushings on the bench to fine tune without pulling the die.
Cross-Compatibility Worth Knowing
One of the best parts about these bushings is that they aren't locked to Hornady gear. They interchange with Redding, Wilson, and RCBS bushing dies, so if you've already got a bushing die from another maker on your press, this .270 will drop right in. That makes it an easy add whether you're building out a Hornady Match Grade die or just filling a gap in your bushing lineup. Made in the USA and sized to a tight tolerance, it's a cheap piece of insurance for better, more repeatable handloads.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 594270
- UPC: 090255592702
- Diameter: 0.270 in
- Finish: Polished Steel
- Type: Neck Sizing Die Bushing
- Quantity: 1
- Gun Type: Rifle
- Compatibility: Hornady, Redding, Wilson, and RCBS bushing dies
- Country of Origin: Made in USA
What’s Included
- One .270" Hornady Match Grade neck sizing bushing
Frequently Asked Questions
What dies does the Hornady Match Grade Bushing .270 work with?
It's made for Hornady's Match Grade bushing dies, but it isn't limited to them. The bushing also interchanges with Redding, Wilson, and RCBS bushing dies, so it drops right into most bushing-style neck sizing setups on the market. If you already run one of those dies, this bushing will fit.
How do I know if the .270 is the right bushing size for my brass?
Measure the neck diameter of a loaded round with calipers, then subtract a couple thousandths for the neck tension you want. The bushing size should match that number rather than the cartridge name. Many reloaders keep a few adjacent sizes on hand since brass neck thickness varies between brands.
Does this bushing come with the die, or is it separate?
This is just the single .270" bushing. Hornady bushing dies and the bushings are sold separately so you can choose the exact size your brass and chamber call for. You'll need the Hornady Match Grade bushing die, or a compatible Redding, Wilson, or RCBS die, to use it.
What does the self-centering design actually do?
The bushing floats inside the die rather than being fixed in place, so it aligns itself to the case neck as it passes through. That keeps the neck concentric and prevents oversizing or overworking the brass. The payoff is more consistent neck tension and longer case life, which translates to steadier accuracy.




Reviews
There are no reviews yet.