Description
The Hornady Match Grade Bushing in .266 diameter is the small part that gives you real control over neck tension in your precision reloading setup. Sized for 6mm cases, this bushing drops into your Hornady Match Grade neck or full-length sizing die and lets you size the case neck to exactly the tension you're after, instead of being stuck with whatever a fixed-diameter die gives you. That control over neck tension is where a lot of the accuracy gains in handloading come from.
What the .266 Match Grade Bushing Does for Your Brass
The self-centering design is the key here. Because the bushing floats and aligns itself to the case, it only sizes the portion of the neck you want and avoids oversizing or overworking the brass. Less working of the neck means your cases last longer and your neck tension stays consistent from load to load, which is exactly what you want when you're chasing small groups at distance.
Picking the Right Bushing Size
Hornady offers these bushings in tight increments so you can fine-tune neck tension down to the thousandth. The general approach is to measure the neck diameter of a loaded round and then choose a bushing a couple thousandths under that number, depending on how much grip you want on the bullet. This .266 size fits into the 6mm family, and if you're building a load it's worth having a couple of neighboring sizes on hand to experiment with.
Cross-Brand Compatibility
One of the nicest things about these bushings is that they aren't locked to one brand of die. The Hornady Match Grade bushings are built to the same common dimensions used by Redding, RCBS, and Wilson bushing-style dies, so they interchange across those systems. If you already run a bushing die from another maker, this .266 bushing will very likely work right in it, giving you more flexibility when you're tracking down the exact size you need.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 594266
- UPC: 090255592665
- Bushing Diameter: .266 in
- Caliber Family: 6mm
- Type: Self-Centering Neck Sizing Bushing
- Quantity: 1
- Compatibility: Hornady, Redding, RCBS, and Wilson bushing-style dies
- Made in USA: Yes
What’s Included
- One Hornady Match Grade .266 neck sizing bushing
Frequently Asked Questions
What dies does the .266 Hornady Match Grade bushing work with?
It's designed for Hornady Match Grade bushing-style neck and full-length sizing dies. Because it's built to the same common dimensions, it also interchanges with Redding, RCBS, and Wilson bushing dies. Forster bushings use their own unique form factor and are the one exception that won't swap over.
How do I choose the right bushing size for my 6mm loads?
Measure the neck diameter of a loaded round, then pick a bushing a couple thousandths smaller than that measurement to set your neck tension. This .266 bushing is one step in the 6mm range, and many reloaders keep a few neighboring sizes on hand to fine-tune grip. Hornady offers them in close increments so you can dial things in precisely.
Does using a bushing really improve accuracy?
The self-centering design sizes only the part of the neck you want and avoids overworking the brass, which keeps neck tension consistent from round to round. That consistency is a big contributor to tighter groups. It also extends case life since the brass isn't being worked as hard on every sizing.
Is a bushing included with Hornady Match Grade dies?
No, these bushings are sold separately so you can select the exact diameter your load calls for. If you bought a Hornady Match Grade bushing die, you'll need to add the correct bushing like this .266 to get it running. That setup is what lets you tune neck tension to your preference.




Reviews
There are no reviews yet.