0
0

Hornady Match Grade Bushing .264 – 6mm Neck Size Bushing 594264

UPC: 090255592641

$23.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady Match Grade Bushing in .264 is the small part that makes a big difference when you're chasing tighter groups. It's a self-centering neck size bushing that slides into your Hornady Match Grade full-length or neck sizing die, giving you direct control over neck tension instead of leaving it up to a fixed expander. For anyone loading 6mm cartridges or 6.5mm brass where a .264 bushing lands in the sweet spot, this is the piece that lets you tune bullet grip to your rifle and your brass.

What the .264 Hornady Bushing Does in Your Die

Bushings are sold in .001 and .002 increments so you can get neck tension exactly where you want it. The self-centering design floats in the die body, which keeps the neck concentric and keeps you from oversizing the case mouth or beating up the brass with every cycle. Less working of the brass means longer case life and more consistent sizing from one loading to the next. Pick the right size, and you're sizing the neck straight and true without fighting an expander ball on the way back out.

Choosing the Right .264 Match Grade Bushing

Sizing selection comes down to your brass and how much tension you want. The easy method is to measure the outside neck diameter of a loaded round with a good micrometer, then subtract .002 to .003 to account for brass spring-back. Most bolt gun loaders run around .001 to .002 of neck tension, while semi-autos usually like a bit more. Since brass wall thickness varies by brand, a lot of folks keep a bushing one size above and below their target on hand to fine-tune.

Built to Last

Made in the USA from steel and backed by Hornady's lifetime warranty, this bushing is a reusable component that'll outlast plenty of brass. It interchanges with other Hornady Match Grade bushings, so if you load multiple calibers you can keep a set and swap by hand in seconds using the knurled spindle holder on the die.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 594264
  • UPC: 090255592641
  • Bushing Diameter: .264 in
  • Caliber Group: 6mm
  • Type: Self-Centering Neck Size Bushing
  • Material: Steel
  • Quantity: 1 bushing
  • Country of Origin: Made in USA
  • Warranty: Lifetime Warranty

What’s Included

  • One Hornady Match Grade Bushing, .264 diameter

Frequently Asked Questions

What dies does the Hornady Match Grade Bushing .264 fit?

It fits Hornady Match Grade full-length and neck sizing dies that accept interchangeable bushings. The bushing is sold separately from the die, so you'll need the Match Grade bushing-style die to use it. It also interchanges with other Hornady Match Grade bushings if you load more than one caliber.

How do I know if .264 is the right bushing size for me?

Measure the outside neck diameter of a loaded round with a micrometer, then subtract .002 to .003 to account for brass spring-back. Because neck wall thickness differs between brass brands, the correct size varies even within the same cartridge. Many loaders keep a bushing one size above and below their target to dial in the exact neck tension they want.

How does the bushing affect neck tension and brass life?

The bushing only sizes the neck down to the diameter you choose, so you control how much the bullet is gripped. Because it doesn't oversize the neck and then open it back up, there's far less working of the brass, which helps cases last longer. That consistency in neck tension is a big part of what leads to tighter, more repeatable groups.

Do I still need to use the expander with this bushing?

Many precision loaders remove the expander and let the bushing do the sizing for a straighter, more concentric neck. The self-centering bushing sizes the neck evenly on its own, and skipping the expander avoids pulling the neck back out of round. It comes down to your setup and preference, but running bushing-only is a common approach for match work.

Additional information

UPC

090255592641

Manufacturer

Manufacturer Part Number

594264

Shipping Weight

0.0188

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade Bushing .264 – 6mm Neck Size Bushing 594264”