0
0

Hornady Lead Round Ball .50 Cal .495″ Muzzleloader 100/ct

UPC: 090255260939

$14.99

42 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Patched round balls have been putting meat on the table since long before cartridge rifles existed, and Hornady's .495" version is the modern take on that tradition. Sized for .50 caliber muzzleloaders and other black powder rifles, each ball is cold swaged from pure soft lead rather than cast in a mold. That process squeezes out the air pockets and voids that plague poured balls, so what you get is a projectile that's genuinely uniform in weight, diameter, and roundness. A smoother, rounder surface grips the patch evenly and rotates cleanly down the bore, which is exactly what you want when you're chasing that one ragged hole at 50 yards.

Why the .495 Diameter Loads the Way It Should

The .495" size runs about five thousandths under bore, which is the sweet spot most experienced hunters point to for a good patch seal without fighting the ramrod. Pair it with a thicker patch, somewhere in the .015" to .018" range, and you'll get the grooves filled and the ball seated snug. It takes a slightly firmer bop on the short starter than a .490 ball, but once it's moving it rams home nice and easy. If your rifle has been shooting decent groups with .490s, stepping up to the .495 is a common trick for squeezing out a little more accuracy.

Putting the .50 Cal Round Ball to Work

Round balls shine in slower-twist barrels, roughly 1:56 to 1:72, though plenty of 1:48 guns shoot them just fine. Hornady rates these for medium game from 50 to 300 pounds, and folks have been dropping whitetail with .50 caliber patched balls for generations. A charge in the 70 to 90 grain range behind this ball is a proven deer load out to sensible muzzleloader distances. The soft pure lead pancakes on impact and opens a wound channel that gets the job done with good shot placement.

Each box holds 100 balls, all run through Hornady's inspection process to hold weight and concentricity tolerances tight. Whether you're punching paper on a lazy afternoon or heading into the timber this season, these are a dependable, no-drama choice.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 6093
  • UPC: 090255260939
  • Caliber: .50 Caliber
  • Ball Diameter: .495 inch
  • Ball Material: Pure Lead
  • Construction: Cold Swaged
  • Quantity: 100 per Box
  • Recommended Use: Medium Game 50-300 lbs, Target
  • Projectile Type: Patched Round Ball

What’s Included

  • 100 Hornady .495" lead round balls (one box)

Frequently Asked Questions

What patch thickness works best with the Hornady .495 round ball?

Most shooters run a patch in the .015" to .018" range with the .495 ball to fully fill the rifling grooves and get a snug seal. Thicker cotton or ticking patches tend to load harder but shoot cleaner and more consistently. If loading feels too tight, dropping to a thinner lubed patch will ease seating, though it may cost you a touch of accuracy. It's worth testing a couple of patch thicknesses to see what your specific barrel prefers.

Will the .495 ball load easily in my .50 caliber rifle?

In most .50 caliber barrels the .495 takes a slightly firmer bop on the short starter than a .490, then rams home with little extra effort. A few older barrels with shallow rifling or tighter bores can be fussy, so if you're borderline, a thinner patch usually solves it. Checking your bore size before choosing a diameter is always smart. When it fits right, that slightly larger ball often tightens up groups noticeably.

Is a .50 caliber round ball enough gun for deer?

Yes, patched round balls have taken whitetail for centuries and the .50 caliber does the job with good shot placement. A charge around 70 to 90 grains behind the .495 ball is a common, proven deer load at typical muzzleloader ranges. The soft pure lead flattens on impact and opens a solid wound channel. Keep your shots within reasonable distances since round balls shed velocity quicker than heavier conicals.

What twist rate shoots these round balls best?

Round balls generally perform best in slower-twist barrels, roughly 1:56 to 1:72, which stabilize the light projectile without stripping it. Many 1:48 twist rifles will also shoot them acceptably, especially at moderate charges around 70 grains. Faster twists made for saboted bullets are usually less ideal for patched balls. As with any muzzleloader, working up loads at the range is the surest way to find the sweet spot.

Additional information

UPC

090255260939

Manufacturer

Manufacturer Part Number

6093

Caliber/Gauge

.50 Caliber

Length

4.1000

Quantity

100

Shipping Weight

2.7

Reviews

There are no reviews yet.

Be the first to review “Hornady Lead Round Ball .50 Cal .495″ Muzzleloader 100/ct”