Description
The .433 diameter ball fills a spot a lot of muzzleloader folks struggle to source, and Hornady swages these from pure lead so every ball in the box measures the same and weighs the same. That kind of uniformity is exactly what you want when you're chasing repeatable accuracy out of a patched round ball setup. Each one is a smooth, round sphere with no visible sprue or cast lines to throw off how the patch grips and how the ball rides the rifling.
Where the .433" Hornady Round Ball Fits
This is a common recommendation for smaller-bore .44 rifles and pistols, including a number of Pedersoli and Hopkins & Allen guns that call for a ball right in the .433 to .435 range. It's a snug patched ball for barrels running a bit tighter than a standard .45, and folks also load them in single-shot black powder target pistols and smoothbore setups. Pair it with a thin patch, somewhere around .010 to .012, and you'll likely want a short starter to seat it clean. Always slug or measure your bore and match your patch thickness before committing to a big batch, since barrels vary more than the caliber stamp suggests.
Why Cold Swaging Matters on the Hornady .433 Ball
Cast balls can trap air pockets and voids as the lead cools, and those hidden flaws throw the center of gravity off just enough to open groups up. Cold swaging squeezes pure lead into a die under pressure instead, so you get better concentricity and a rounder finished ball. Hornady runs them through an inspection process to hold weight and roundness tolerances, which is the difference between a ball that flies true and one that wanders.
With 100 balls per box, you've got plenty for a good afternoon of load development at the range plus a stash left over for hunting season.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 6030
- UPC: 090255260304
- Caliber: .44 Caliber
- Ball Diameter: .433"
- Projectile Material: Pure Lead
- Construction: Cold Swaged
- Projectile Type: Round Ball
- Quantity: 100 per Box
- Intended Use: Muzzleloaders and Black Powder Firearms
What’s Included
- 100 Hornady .44 Cal .433" lead round balls
Frequently Asked Questions
What firearms use the .433" Hornady round ball?
The .433 ball is a good match for smaller-bore .44 caliber rifles and pistols that run tighter than a standard .45. Several Pedersoli and Hopkins & Allen guns are recommended for a ball in the .433 to .435 range, and it also gets loaded in single-shot black powder target pistols and some smoothbores. Always measure your bore first, since barrels vary quite a bit from one gun to the next.
Do I need a patch with these round balls?
Yes, in a rifle or pistol the round ball is loaded with a cloth patch that seals the bore and grips the rifling. A thin patch around .010 to .012 pairs well with the .433, and the fit can be snug enough that a short starter helps. The patch also protects the soft lead as you seat the ball down the barrel.
Why choose cold swaged balls over cast?
Cold swaging presses pure lead into a die under pressure, which eliminates the air pockets and voids that can form in cast balls as they cool. That gives you better concentricity and more consistent weight from ball to ball. The result is a rounder projectile that rotates cleaner and tends to group tighter.
How many round balls come in a box?
Each box holds 100 pure lead round balls. That's enough to work up a load at the range and still keep a supply on hand for hunting or plinking. It's a practical count for anyone shooting a .44 caliber muzzleloader with any regularity.




Reviews
There are no reviews yet.