Description
The .36 caliber patched round ball has been putting squirrels in the pot and holes in paper for generations, and Hornady's .350 diameter version is one of the easiest ways to feed a small-bore frontloader without setting up a lead pot in the garage. Each ball weighs right around 65 grains, and because they come 100 to a box, you've got plenty for a season of plinking and small game hunting.
What Sets These Hornady Round Balls Apart
Instead of casting, Hornady cold swages these from pure soft lead. That process squeezes out the air pockets and voids you sometimes run into with cast balls, and it leaves you with a smoother, rounder surface. Rounder and more uniform means a better grip on the patch and better rotation down the bore, which translates to more consistent accuracy shot after shot. There's no sprue to fuss over and no sorting out the ugly ones before you head to the range.
Dialing In Your .36 Caliber Load
The .350 ball is meant to be run with a patch, so pair it with a lubed cotton patch in the thickness your barrel likes best, usually somewhere in the .010 to .018 range. Most .36 caliber squirrel rifles are cut with a 1:48 twist that handles patched round balls just fine, and shooters tend to settle in around 20 to 25 grains of FFFg for small game and closer to 35 to 45 grains when they want the flattest, most accurate target load. Every barrel has its own sweet spot, so a little bench time with different patch and powder combos pays off.
Small Game and Target Work
The .36 hits a nice middle ground between the tiny .32 squirrel guns and the bigger deer calibers. It carries a touch more energy and bucks the wind slightly better than a .32 while still being economical to shoot all afternoon. For squirrels, rabbits, and informal target matches, this is a proven, no-nonsense projectile that keeps things traditional.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 6010
- UPC: 090255260106
- Caliber: .36 Caliber
- Ball Diameter: .350 inch
- Approximate Weight: 65 grains
- Projectile Material: Pure Lead
- Construction: Cold Swaged
- Projectile Type: Patched Round Ball
- Quantity: 100 per box
What’s Included
- 100 Hornady .36 caliber .350 diameter lead round balls
Frequently Asked Questions
What size patch should I use with the .350 round ball?
The .350 Hornady ball is designed to be loaded with a patch rather than compression fit, so most .36 caliber shooters run a lubed cotton patch somewhere between .010 and .018 thick. The right thickness depends on your bore and rifling depth, so it's worth trying a couple sizes on the bench to see what groups best. A snug patch that takes firm steady thumb pressure to start usually gives the cleanest accuracy.
Will these work in a 1:48 twist barrel?
Yes. Most .36 caliber rifles, including the popular Thompson/Center and Traditions small-bore guns, use a 1:48 twist that stabilizes a patched round ball well, especially with reasonably deep rifling. Slower twists like 1:66 or smoothbores also do great with round balls, so this projectile covers just about every traditional .36 setup out there.
How much powder do I load behind a .36 caliber round ball?
For squirrels and small game up close, many shooters stick with 20 to 25 grains of FFFg for a quieter, meat-friendly load. When you want the tightest target groups or a bit more reach, 35 to 45 grains of FFFg tends to be the accuracy sweet spot in most barrels. Always start low, work up gradually, and follow your rifle maker's recommendations.
Are these cold-swaged balls better than cast balls?
Cold swaging presses pure lead into shape instead of pouring it, which eliminates the air pockets, voids, and sprue marks you can get with home-cast balls. The result is a more uniform, rounder projectile that grips the patch evenly and rotates consistently down the bore. That uniformity is exactly what helps you shoot tighter, more repeatable groups without sorting through your own castings.





Reviews
There are no reviews yet.