Description
If you're loading 6mm ARC and want brass that feeds right every time, the Hornady 6mm ARC Full Length Die handles the heavy lifting. This is the full length sizing die (.243 diameter) from Hornady's Custom Grade Series III line, and it resizes the entire length of your fired cases back to factory dimensions. That full length treatment is what keeps your reloads cycling reliably in AR-platform rifles, while still giving bolt gun shooters the consistency they're after.
What the Zip Spindle Brings to the 6mm ARC Die
The standout feature here is Hornady's Zip Spindle. A series of light threads cut into both the spindle and spindle collet lets you make fine, incremental adjustments by turning the spindle, or you can zip it up and down quickly for bigger changes. Once it's where you want it, it locks positively so there's no slippage mid-session. That means you dial in your decapping and expander setup once and trust it to stay put load after load.
Smooth Sizing From the Elliptical Expander
Instead of an old-school ball expander, this die uses Hornady's elliptical expander. It works through the case neck with noticeably less drag, which cuts down on friction and case neck stretch. Over the life of your brass that translates to more even neck tension and less trimming headache. The internal finish is some of the cleanest in the business, so cases run through smooth with minimal effort on the press handle.
Built Into the Hornady Series III System
Machined from high strength steel, this die is made to last through years of loading. It threads into any standard 7/8-14 press and plays nicely with Hornady's Lock-N-Load bushing system for fast die swaps. It also ships with a Sure-Loc lock ring that wraps fully around the die body and clamps with even pressure, so your settings hold their position when you back the die out and thread it back in. Whether you're running a dedicated AR load or chasing small groups from a bolt gun, this is the sizing half of the equation done right.
Key Specifications
- Manufacturer: Hornady
- Caliber: 6mm ARC (.243)
- Die Type: Full Length Sizing Die
- Series: Custom Grade Series III
- Spindle: Zip Spindle
- Expander: Elliptical Expander
- Material: High Strength Steel
- Lock Ring: Sure-Loc
- Press Thread: 7/8-14
- Number of Dies: 1
- Manufacturer Part Number: 046262
- UPC: 090255462623
- Shipping Weight: 0.525 lb
What’s Included
- Hornady 6mm ARC Full Length Sizing Die
- Sure-Loc lock ring
Frequently Asked Questions
Will the Hornady 6mm ARC full length die work for both AR and bolt action rifles?
Yes. This die performs full length sizing, resizing the whole case back to original dimensions so your reloads chamber and feed reliably in AR-platform rifles. Bolt gun shooters can run the same die and benefit from the consistency it produces.
What is the Zip Spindle and why does it matter?
The Zip Spindle uses light threads cut into both the spindle and collet, letting you make precise incremental adjustments or quickly zip the spindle up and down for larger moves. Once set, it locks positively so it won't slip during a loading session. It makes dialing in your decapping pin and expander fast and repeatable.
Is this a complete die set or just the sizing die?
This is the full length sizing die only, sold as a single die. If you want a complete setup, you'll also need a seating die, or you can look at Hornady's 6mm ARC Series III two-die set which includes both.
Does the 6mm ARC die fit standard reloading presses?
It does. The die uses the industry standard 7/8-14 thread, so it threads into any common single stage or progressive press. It also works with Hornady's Lock-N-Load bushing system for quick die changes.




Reviews
There are no reviews yet.