Description
If you've picked up a 25 Creedmoor and you're tired of chasing factory ammo, this is the die that gets your reloading bench squared away. The Hornady Series III Full Length Die resizes fired brass back down to spec in one pass, bumping the shoulder, sizing the neck, and knocking out the spent primer all at the same time. It's a single full-length sizing die, machined and polished to the kind of mirror finish Hornady is known for, so cases feed in and release without sticking or dragging.
What the Series III 25 Creedmoor Die Brings to the Bench
The star of the show is the Zip Spindle. Instead of a smooth rod that slips when you're trying to lock in a setting, the spindle and collet have light threads cut into them. That lets you zip the decap assembly up or down fast for big moves, then dial in fine adjustments by turning the spindle a touch at a time, and it stays put once you snug the lock down. The polished elliptical expander is a Hornady staple for good reason. It glides through the case neck far smoother than a traditional ball expander, which cuts down on friction and keeps neck stretch in check over the life of your brass.
Fit and Setup for the 25 Creedmoor Reloader
The die uses the standard 7/8-14 threads, so it'll screw right into any common single-stage or progressive press, whether you're running a Hornady Lock-N-Load, an RCBS Rock Chucker, or something similar. The hardened steel decapping pin holds up to depriming tougher, crimped primer pockets without bending. A Sure-Loc ring clamps evenly around the die body to hold your setting rock solid, and the whole thing ships in a compartmented storage box to keep it organized on the shelf.
25 Creedmoor is a flat-shooting, efficient round that rewards careful handloading, and a quality sizing die is where that accuracy starts. Pair this with a good seating die and your shell holder and you're ready to start turning out consistent, concentric rounds.
Key Specifications
- Manufacturer: Hornady
- Caliber: 25 Creedmoor (.257)
- Series: Custom Grade Series III
- Die Type: Full Length Sizing Die
- Configuration: Single Die
- Thread Size: 7/8-14
- Spindle: Zip Spindle with threaded collet
- Expander: Polished Elliptical Expander
- Decapping Pin: Hardened Steel
- Overall Length: 6.25 in
- Shipping Weight: 0.51 lbs
- Manufacturer Part Number: 046266
- UPC: 090255462661
What’s Included
- Full length sizing die
- Sure-Loc lock ring
- Compartmented storage box
- Instruction sheet
Frequently Asked Questions
Is this a complete die set or just the sizing die?
This is a single full-length sizing die, not a two-die set. It handles resizing fired 25 Creedmoor brass and depriming in one stroke, but you'll need a separate seating die to load finished rounds. A lot of folks running a dedicated process or who already own a seater prefer buying the sizing die on its own.
Will the Hornady Series III 25 Creedmoor die fit my press?
Yes, it uses standard 7/8-14 threads, which is the common size for reloading dies. It threads right into single-stage and progressive presses like the Hornady Lock-N-Load, RCBS Rock Chucker, Lee, and most others on the market.
Does this die come with a shell holder?
No, a shell holder is not included. You'll need the correct shell holder for the 25 Creedmoor case head, which shares the same case base as the 6.5 Creedmoor family. It ships with a Sure-Loc ring and a storage box.
What is the Zip Spindle and why does it matter?
The Zip Spindle has light threads cut into the spindle and collet so it locks in place without slipping. That means you can make quick large adjustments by zipping it up or down, then fine-tune with small turns, and it holds your setting once tightened. It takes a lot of the fuss out of dialing in your decap and expander depth.





Reviews
There are no reviews yet.