Description
If you've been running Hornady's long, sleek match bullets through a standard seating stem, you already know the frustration. The generic stem that ships in most die sets contacts the wrong part of the bullet and can leave rings or dents on that delicate ogive and tip. This .224 stem solves that by matching the actual profile of Hornady's high-performance 22 caliber projectiles, so the stem cradles the bullet where it should and seats it straight and clean.
What the .224 A-Tip/ELD Match Stem Fits
This stem is machined for Hornady's 22 caliber .224 diameter match and hunting bullets, covering popular 75, 80, and 88 grain ELD Match loads along with the heavier A-Tip offerings. It only works inside Hornady Custom Grade New Dimension Seating Dies and is not cross-compatible with dies from other makers. If you're loading .223, .22-250, .224 Valkyrie, or any other .224 bore cartridge with these bullets, this is the insert you want.
Swapping In the Seating Stem
Installation takes a minute or two at the bench. You back out your seating adjustment, pull the factory stem from the die body, drop this one in, and re-set your seating depth. Hornady's seating dies use a floating alignment sleeve that lines up the case neck and bullet before seating, and pairing that sleeve with the correct contact stem is where you really see runout tighten up and seated lengths get more uniform round to round.
Why the Right Stem Matters for Match Loads
High-BC bullets live and die by a clean, undamaged meplat and ogive. A mismatched stem that grabs the tip can tweak your BC and open up your groups at distance. Reloaders who chase small numbers on the target and the chronograph tend to consider a profile-correct stem like this one a quiet little upgrade that punches above its size. It's a simple machined steel part, but it does one job and does it right.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397100
- UPC: 090255971002
- Caliber: 22 Caliber (.224 diameter)
- Bullet Compatibility: A-Tip, ELD Match, A-MAX, ELD-X, FTX style .224 bullets
- Bullet Weights: 75, 80, 88 grain ELD Match / A-Tip
- Die Compatibility: Hornady Custom Grade New Dimension Seating Dies only
- Material: Steel
- Quantity: 1 seating stem
- Length: 5.55 in
- Country of Origin: United States
What’s Included
- 1 Hornady .224 A-Tip/ELD Match seating stem (MPN 397100)
Frequently Asked Questions
Which dies does the Hornady .224 seating stem work with?
This stem is designed to fit Hornady Custom Grade New Dimension Seating Dies only. You simply remove the standard seating stem from your die body and install this one in its place. It is not compatible with seating dies from other manufacturers.
What bullets does this .224 A-Tip/ELD Match stem fit?
It is machined to match the profile of Hornady's 22 caliber .224 bullets, including 75, 80, and 88 grain ELD Match loads and the A-Tip line. It also works well with the ogive on A-MAX, ELD-X, and FTX style projectiles in the same caliber. Using the correct profile stem keeps the stem off the tip and the sensitive nose area of the bullet.
Why would I replace the stem that came with my die?
Factory stems are often shaped for more general bullet profiles and can contact the tip or dent the ogive on long, high-BC match bullets. A profile-matched stem like this one seats those bullets cleanly without marring the nose, which helps protect your ballistic coefficient and keeps seating depth consistent. For precision and long-range loads, that small change makes a noticeable difference on paper.
Will this stem improve concentricity and runout?
The stem itself seats the bullet without damaging it, and when paired with the floating alignment sleeve in Hornady's seating dies, it helps align the case neck and bullet before seating. That combination is what tightens up runout and gives you more uniform seated lengths. It is a simple part, but it plays a real role in building straighter, more repeatable ammo.




Reviews
There are no reviews yet.