Description
Loading the .350 Legend is a different game than running bottleneck rifle brass, and the expander die is the piece that makes it click. Straight-wall cases don't get their case mouth opened up during full-length sizing the way a bottleneck case does with an expander ball, so you need a dedicated die to put a slight bell on the mouth. The Hornady Custom Grade Series V Expander Die handles exactly that step, opening the inside of the case to the right diameter and flaring the mouth just enough so a .355" bullet starts straight instead of catching and shaving brass.
What the .350 Legend Expander Die Does on Your Press
This die opens the case mouth to accept the bullet and adds a touch of flare for easy, square seating. That little bell is the difference between a bullet that drops in true and one that tips, so it pays off in both consistency and sanity at the bench. It uses a standard 7/8"-14 thread, so it threads into any press that takes common dies, and it works with the Lock-N-Load bushing system on modern Hornady presses.
Build Quality You'd Expect From Hornady Custom Grade
Hornady machines these dies to tight tolerances with a smooth internal finish, which keeps adjustments easy and brass flowing without drama. The Series V expander ships with a Sure-Loc lock ring that clamps around the full body of the die to apply even pressure, so your setting stays put without the lock screw ever biting into the threads. It's backed by Hornady's reputation for dies that hold up through years of loading.
Where This Die Fits in Your .350 Legend Setup
Think of this as the middle piece of a straight-wall rifle die setup, sitting between your sizing die and your seating die. It pairs right into the Hornady Series V four-die .350 Legend lineup, and plenty of folks grab it on its own to round out a set or replace a worn part. One thing worth knowing before you order: a shell holder is not included, so grab the correct one for .350 Legend if you don't already have it.
Key Specifications
- Manufacturer: Hornady
- Product Line: Custom Grade Series V
- Die Type: Expander Die
- Caliber: .350 Legend
- Bullet Diameter: .355"
- Die Series: V
- Thread: 7/8"-14
- Quantity: 1 die
- Material: Steel
- Country of Origin: United States
- Manufacturer Part Number: 045507
- UPC: 090255455076
What’s Included
- Hornady Custom Grade Series V Expander Die (.350 Legend)
- Sure-Loc lock ring
Frequently Asked Questions
Do I really need an expander die to reload .350 Legend?
Yes, straight-wall cartridges like the .350 Legend need a dedicated expander step that bottleneck rifle cases don't. The sizing die doesn't open the case mouth the way a bottleneck die's expander ball does, so without this die you'll have trouble starting bullets straight. This die opens the mouth to the proper diameter and adds a slight flare for clean seating.
Does the Hornady Series V Expander Die come with a shell holder?
No, a shell holder is not included with this die. You'll need to pick up the correct shell holder for .350 Legend separately if you don't already have one in your kit. The die itself ships with a Sure-Loc lock ring.
Will this die fit my reloading press?
It uses the industry-standard 7/8"-14 thread, so it threads into any press that accepts common dies. It also works with the Lock-N-Load bushing system found on modern Hornady presses. The included lock ring helps you keep your adjustment consistent once it's dialed in.
Is this part of the Hornady Series V four-die .350 Legend set?
Yes, this is the same expander die found in the Hornady Custom Grade Series V four-die .350 Legend lineup. Buying it on its own is handy for completing a set or replacing a worn or lost die. Bullet diameter for the .350 Legend is .355 inch, which this die is built around.




Reviews
There are no reviews yet.