Description
If you're feeding an 8.5×55 Blaser and want handloads that drop in clean and shoot consistently, this Hornady Custom Grade two-die set covers the two jobs that matter most: sizing your brass back to spec and seating bullets where you want them. It's the same proven New Dimension design Hornady runs across their rifle die lineup, cut specifically for the .338 diameter 8.5×55 Blaser case. You get a full-length sizing die and a seating die, both machined to Hornady's standard and backed by that smooth internal finish the Custom Grade line is known for.
What Sets This 8.5×55 Blaser Die Set Apart
The full-length sizer runs Hornady's Zip Spindle, which has fine threads cut into both the spindle and collet. That little detail stops the spindle from slipping when you lock it down, so your decapping and expander settings stay put instead of creeping on you mid-session. It's one of those features you don't think about until you've fought with dies that won't hold an adjustment.
The seating die uses a floating bullet alignment sleeve and stem that pre-align the bullet and case neck before the bullet ever starts into the case. That pre-alignment is where your concentricity and consistency come from, and it also applies a crimp to keep the bullet locked in place. For a cartridge like the 8.5×55 Blaser, where quality components and clean handloads are part of the game, that kind of repeatability pays off at the bench and in the field.
Setup Notes for the Hornady 8.5×55 Blaser Dies
These thread into any standard 7/8-14 single-stage or progressive press and ship in a compartmented plastic storage box with two Sure-Loc lock rings. One thing worth knowing up front: the shellholder is not included and is sold separately. For the 8.5×55 Blaser you'll want a Hornady #35 shellholder to complete your setup.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546443
- UPC: 090255564433
- Cartridge: 8.5×55 Blaser
- Bullet Diameter: .338
- Series: Custom Grade New Dimension (Series III)
- Die Count: 2 (Full Length Sizer, Seater)
- Thread Size: 7/8-14
- Shellholder: #35 (sold separately)
- Sizing Type: Full-length
- Spindle Design: Zip Spindle
- Seating System: Floating bullet alignment sleeve and stem
- Lock Rings: Two Sure-Loc rings included
- Packaging: Compartmented plastic storage box
What’s Included
- Custom Grade New Dimension Full Length Sizer Die
- Custom Grade New Dimension Seating Die
- Two Sure-Loc lock rings
- Plastic storage box
Frequently Asked Questions
Does the Hornady 8.5×55 Blaser die set come with a shellholder?
No, the shellholder is not included and is sold separately. For the 8.5×55 Blaser (.338) you'll want a Hornady #35 shellholder. It's a quick add-on and only needs to be bought once since a single shellholder works across several cartridges sharing the same case head.
What dies are in this set?
You get two dies: a Custom Grade New Dimension full-length sizing die and a matching seating die. The sizer resizes the whole case and decaps the spent primer, while the seater seats your bullet to the chosen depth and applies a crimp. Together they handle the core steps of loading 8.5×55 Blaser.
Will these dies fit my press?
Yes. Both dies use the industry-standard 7/8-14 thread, so they'll thread into any standard single-stage or progressive press. Just add the correct #35 shellholder and you're set to go.
What is the Zip Spindle and why does it matter?
The Zip Spindle has fine threads cut into both the spindle and collet so you can make small, precise adjustments to the decapping and expander assembly without it slipping. It also lets you zip the spindle up or down quickly for bigger moves. The payoff is that your settings stay locked where you put them while you work through a batch of brass.



Reviews
There are no reviews yet.