Description
If you're loading 6.5 Creedmoor at the bench, this Hornady Custom Grade Series I set covers the two jobs that matter most: resizing your fired brass and seating bullets to a repeatable depth. It's a two-die set with a full-length sizing die and a bullet seater, both machined to Hornady's Custom Grade standards and backed by their lifetime no-risk warranty. These are the dies a lot of folks reach for when they want quality gear without overthinking it.
What Sets the Series I 6.5 Creedmoor Sizing Die Apart
The full-length sizer brings cases back to SAAMI minimum spec so your loaded rounds chamber cleanly. It uses an elliptical expander instead of a standard ball type, which cuts down on neck friction and the stretching that shortens brass life. Inside, the die is hand-polished so it won't scratch your cases, and the hardened decapping pin handles depriming without bending or breaking, even on crimped primer pockets. The Zip Spindle has light threads cut into the spindle and collet to stop slippage, so tightening the spindle lock during adjustments is quick and painless.
Dialing In the 6.5 Creedmoor Bullet Seater
The seating die comes with a floating alignment sleeve built in, something other makers often charge extra for. It pre-aligns the bullet and case before seating, which keeps runout down and helps every round sit at the same depth. The seater adjustment screw uses a lock ring and rubber washer to give you the fine tension you need for precise depth changes, and the die can apply a light crimp if you want it.
Both dies ride in Hornady's Sure-Loc lock rings, which clamp around the full die body so the locking screws never dig into the threads. A quick-release retainer spring near the base of the seater lets you pull it apart in seconds for cleaning. The set works with standard 7/8-14 presses, so it'll drop right into most setups you already own.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546289
- UPC: 090255562897
- Model: Custom Grade Series I
- Caliber: 6.5mm Creedmoor
- Bullet Diameter: 0.264 in
- Product Type: 2-Die Set (Full-Length Sizing / Seater)
- Dies In Set: 2
- Thread Size: 7/8-14
- Material: Steel
- Gun Type: Rifle
- Length: 7.4 in
- Shipping Weight: 1.35 lb
- Warranty: No-Risk Lifetime Warranty
What’s Included
- Full-Length Sizing Die with Zip Spindle
- Elliptical Expander
- Hardened decapping pin
- Bullet Seating Die with floating alignment sleeve
- Sure-Loc lock rings
Frequently Asked Questions
What comes in the Hornady Series I 6.5 Creedmoor 2-die set?
You get two dies: a full-length sizing die and a bullet seating die. The sizer includes the Zip Spindle, an elliptical expander, and a hardened decapping pin, while the seater has a built-in floating alignment sleeve. Both dies come with Hornady's Sure-Loc lock rings.
Will this die set fit my reloading press?
Yes, these dies use the standard 7/8-14 thread, so they'll thread into just about any common single-stage or progressive press. If your press takes standard dies, this set will drop right in.
Does the seating die apply a crimp?
The seating die can apply a light crimp to help hold the bullet in the case if you choose to set it up that way. Many 6.5 Creedmoor handloaders skip the crimp for precision work and simply use the die to seat to a consistent depth. Either approach works with this die.
What's the difference between the sizing die and the expander?
The full-length sizing die resizes the whole case back to SAAMI minimum spec so rounds chamber reliably. Hornady's elliptical expander, which opens the neck as the case is withdrawn, reduces neck friction and brass stretching compared to a standard ball expander. The result is smoother sizing and longer case life.




Reviews
There are no reviews yet.