0
0

Hornady Series I 2-Die Set .30-30 Win – Custom Grade 546342

UPC: 090255563429

$48.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .30-30 Winchester has been feeding lever guns and dropping deer for well over a century, and if you shoot one often enough, rolling your own just makes sense. This Hornady Custom Grade Series I 2-Die Set is the setup that gets you there. It covers the two jobs that matter for straightforward .30-30 loading: a full-length sizing die that brings fired brass back to SAAMI minimum spec, and a bullet seater die that drops your projectile exactly where you want it. Keep in mind the .30-30 runs a .308 diameter bullet, so this set is matched to the right components right out of the box.

What Sets the Hornady Series I .30-30 Dies Apart

Hornady put a lot of thought into the details here. The full-length sizer uses the Zip Spindle design, which is a series of light threads cut into the spindle and collet so you can make fine decapping-rod adjustments by turning it or zip it up and down quick for bigger moves. No more knuckle-busting to lock the spindle. The elliptical expander beats a standard ball expander for smooth neck sizing, cutting down on friction and case neck stretch so your brass lasts longer. There's also a hardened steel decapping pin that won't bend or snap, even when you're knocking out crimped primers.

Dialing In the Hornady 546342 Seater Die

The seater die runs an adjustment screw for setting bullet depth and aligns the bullet in the sleeve as it enters the die, which helps with concentricity and downrange accuracy. When it's time to clean, the locking retainer ring pulls out in seconds for easy disassembly. Both dies ship with Hornady's Sure-Loc lock rings that clamp around the entire die body with wrench flats, so the setting holds without the lock screw ever digging into the threads.

Built to Outlast You

Hornady backs these Custom Grade dies with a guarantee they'll never break or wear out under normal use. They thread standard 7/8-14 and drop into any common single-stage or turret press. The set comes in a compartmentalized storage box with room for shell holders, bushings, and extras. Worth noting: a shell holder is sold separately, so grab the correct one if you don't already have it on the bench.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number (MPN): 546342
  • UPC: 090255563429
  • Caliber: .30-30 Winchester (.308 bullet diameter)
  • Series: Series I
  • Grade: Custom Grade
  • Product Type: Full Length Die Set
  • Dies in Set: 2 (Full-Length Sizer, Bullet Seater)
  • Thread Size: 7/8-14
  • Material: Steel
  • Spindle Design: Zip Spindle
  • Expander Type: Elliptical Expander
  • Lock Rings: Sure-Loc with wrench flats
  • Country of Origin: United States
  • Shipping Weight: 1.75 lbs

What’s Included

  • Full-length sizing die with Zip Spindle
  • Bullet seater die
  • Two Sure-Loc lock rings
  • Elliptical expander
  • Headed decapping pin
  • Compartmentalized storage box

Frequently Asked Questions

Does the Hornady Series I .30-30 die set come with a shell holder?

No, a shell holder is sold separately with this set. The .30-30 Winchester uses a specific shell holder size, so you'll want to pick up the correct one if it isn't already on your bench. Dies and shell holders are sold apart since most reloaders build up a collection over time.

What bullet diameter do these .30-30 dies load?

The .30-30 Winchester uses a .308 diameter bullet, and this die set is matched for that. It's easy to confuse with the case name, but the projectile measures .308, same as .308 Win and .30-06. Just make sure the bullets you buy are .308 and you're set.

Will this Hornady 546342 set fit my reloading press?

Yes, these dies use the standard 7/8-14 thread and work in any common single-stage or turret press. If you run a Hornady Lock-N-Load press, you'll want the matching Lock-N-Load die bushings, which are sold separately. Otherwise they thread right into your press like any standard die.

What's the difference between the Zip Spindle and older Hornady dies?

The Zip Spindle has light threads cut into both the spindle and the collet, so you can fine-tune the decapping rod by turning it or zip it up and down fast for larger adjustments. It locks positively to eliminate slippage and takes the fight out of tightening the spindle lock. It's a nice quality-of-life upgrade over older designs.

Additional information

UPC

090255563429

Manufacturer

Manufacturer Part Number

546342

Caliber/Gauge

.30-30 Winchester

Length

7.5000

Product Type

Full Length Die Set

Shipping Weight

1.75

Reviews

There are no reviews yet.

Be the first to review “Hornady Series I 2-Die Set .30-30 Win – Custom Grade 546342”