0
0

Hornady Series II 3-Die Set .44 Special/.44 Mag 546548

UPC: 090255565485

$59.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run a .44 Special or .44 Magnum and you're tired of paying factory prices for ammo that doesn't shoot the way you want, this Hornady Custom Grade Series II 3-die set is where a lot of handloaders land. It covers both cartridges since they share the same .430 bullet diameter, so one set loads your plinking .44 Special and your heavy hunting .44 Mag without swapping anything out. The set includes a straight-wall sizing die, an expander die, and a bullet seater with a built-in roll crimper.

What Sets the Hornady Series II .44 Dies Apart

The sizing die uses a titanium nitride coated ring, often called the gold ring, which is harder than carbide and runs without case lube. That means no messy spray, no stuck cases, and no scratched brass when you resize. The internal die profile is precision machined and polished smooth, so cases feed and release cleanly pass after pass. For straight-wall revolver brass like the .44, that lube-free convenience is a real time saver on the bench.

Dialing In the .44 Special/.44 Mag Die Set

Hornady's Zip Spindle design uses light threads on the spindle and collet to lock everything in place and kill the slippage that plagues older dies. Adjustments stay put, and tightening the lock no longer means busting your knuckles. The Sure-Loc lock rings clamp around the full circumference of the die and apply even pressure across the threads, so your settings hold once you've got them where you want. The in-line seating system keeps the bullet, case neck, and seating stem aligned before the bullet enters the case for consistent, square seating.

The built-in roll crimp on the seater is a nice touch for magnum revolver loads, letting you crimp into the cannelure to keep bullets from jumping under recoil without needing a separate crimp die on your press. Everything ships in Hornady's compartmented die box, and the whole set carries Hornady's reputation for dies that hold up for the long haul. Grab a set of shell holders in the right size and you're ready to start running .44 on your press.

Key Specifications

  • Manufacturer: Hornady
  • Series: Custom Grade Series II
  • Manufacturer Part Number: 546548
  • UPC: 090255565485
  • Caliber: .44 Special / .44 Remington Magnum (.430)
  • Set Type: 3-Die Set
  • Dies Included: Sizer, Expander, Seater
  • Sizing Ring: Titanium Nitride (no lube required)
  • Crimp Type: Roll Crimp (built into seater)
  • Spindle: Zip Spindle Design
  • Lock Rings: Sure-Loc with Wrench Flats
  • Die Thread Size: 7/8"-14
  • Overall Length: 7.55 in
  • Shipping Weight: 1.65 lb

What’s Included

  • Straight-wall sizing die
  • Expander die
  • Bullet seater die with built-in roll crimper
  • Sure-Loc lock rings with wrench flats
  • Allen wrench for lock rings
  • Compartmented die box

Frequently Asked Questions

Does the Hornady Series II .44 die set load both .44 Special and .44 Magnum?

Yes. Both cartridges use the same .430 bullet diameter and share the same case rim and body dimensions, so this one set handles both. You just adjust the seating and crimp depth for the different case lengths and loads you're running.

Do I need case lube with these dies?

No. The sizing die uses a titanium nitride coated ring that's harder than carbide and runs without lubrication on straight-wall pistol brass. That saves you the mess of spraying and wiping cases, though some reloaders still use a touch of lube if they want the smoothest stroke.

Does the Hornady .44 die set include a separate crimp die?

This is a 3-die set with a sizer, expander, and seater. The seating die has a built-in roll crimper, so you can seat and crimp in one station without buying a dedicated crimp die. The roll crimp is well suited to magnum revolver loads where you want the bullet locked into the cannelure.

Will these dies fit my press?

They use the standard 7/8"-14 thread, so they'll thread into any common single-stage or progressive press that accepts standard dies. You will need the correct shell holder for the .44 case, which is sold separately.

Additional information

UPC

090255565485

Manufacturer

Manufacturer Part Number

546548

Caliber/Gauge

.44 Magnum

Length

7.5500

Product Type

3-Die Set

Shipping Weight

1.65

Reviews

There are no reviews yet.

Be the first to review “Hornady Series II 3-Die Set .44 Special/.44 Mag 546548”