Description
If you cast your own .25 caliber bullets, these Hornady crimp-on gas checks are one of those small components that make a real difference once you start pushing velocities. They're little copper cups that seat onto the base of a cast lead bullet during the sizing step, and that copper barrier does a lot of quiet work in the barrel. For anyone running cast loads in a .25 cal rifle or working up higher-speed loads, they're a staple on the reloading bench.
What These Hornady .25 Cal Gas Checks Do
The check crimps onto the bullet base as it passes through your sizing die. Once it's on there, it seals off the propellant gases behind the bullet so they can't cut into the soft lead, and it shields the base from deformation during that first jolt of pressure. The practical payoff is a cleaner bore with less lead buildup, which means more rounds between scrubbing sessions and more consistent accuracy as a string goes on. Casters running powder-coated bullets often seat these before final sizing and find they can reach higher velocities without the leading that usually shows up.
Fit and Build on the .25 Cal Crimp-On Checks
These are made from copper and sized specifically for .25 caliber cast bullets, which puts them in the .257 neighborhood. They're the crimp-on style, so they're designed to be attached during sizing rather than press-fit by hand. If your mold is set up for a gas check base, these are the matching piece. They come from Hornady's long-running gas check line, which has a solid reputation among folks who cast in volume.
You get 1000 checks in the box, so a single order keeps a casting session or several going without running dry mid-project. Keep them in their packaging until you're ready to size and they'll feed smoothly through the process.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 7030
- UPC: 090255270303
- Caliber: .25 Caliber (.257)
- Type: Crimp-On Gas Checks
- Material: Copper
- Quantity: 1000 per box
- Intended Use: Cast lead bullets
- Country of Origin: United States
What’s Included
- 1000 Hornady .25 caliber crimp-on gas checks
Frequently Asked Questions
How do these Hornady .25 cal gas checks attach to the bullet?
They crimp onto the base of the cast bullet during the sizing step. As the bullet passes through your sizing die, the copper check seats and crimps in place. These are the crimp-on style, so they're meant to be applied through sizing rather than pressed on by hand.
What size bullets do the 7030 gas checks fit?
They're made for .25 caliber cast bullets, which fall in the .257 diameter range. Your bullet mold needs to be cut for a gas check base for these to seat properly. If your mold has a plain base, these won't attach correctly.
Why use gas checks on cast bullets at all?
The copper check seals off hot propellant gases behind the bullet and protects the soft lead base from deformation under pressure. That lets you run higher velocities with less leading in the bore. The result is a cleaner barrel and more consistent accuracy over a string of shots.
Can I use these with powder-coated cast bullets?
Yes, many casters seat gas checks on powder-coated bullets before final sizing. The combination helps push velocities higher while keeping leading down. Just make sure your mold is a gas check design so the check has a base to grab onto.




Reviews
There are no reviews yet.