0
0

Hornady Cam-Lock Bullet Collet #14 .204 for 20 Cal Rifle Cartridges

UPC: 090255921670

$13.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Every reloader eventually ends up with a round that needs to come apart, whether it's a bad charge, the wrong seating depth, or just salvaging good components from a batch that didn't go right. The Hornady Cam-Lock Bullet Collet #14 is the piece that makes that job clean on your .204 diameter loads. It drops into the Hornady Cam-Lock Bullet Puller and clamps down on the bullet so you can draw it out of the case without dinging the jacket or scattering powder everywhere.

This is the #14 size, cut specifically for .204 diameter bullets. That covers the usual 20-caliber suspects like the .204 Ruger, 20 VarTarg, and 20 Tactical. The puller works like a draw collet on a lathe: you run the round up into the die, cam the handle to lock the collet onto the bullet, then lower the ram and the bullet stays put while the case pulls free. It's quick, repeatable, and a lot kinder to your components than smacking an inertia hammer on the bench.

Why the Cam-Lock Collet #14 Earns Its Spot

The collet is the business end of the whole setup, so matching it correctly to your bullet diameter matters. Running the right size means a firm, even grip that holds the bullet without crushing or scoring it, which is exactly what you want if you're planning to reuse those projectiles. For anyone loading the little 20s, the #14 is the one you need.

Pairing the Collet #14 With the Cam-Lock Puller

Keep in mind the collet is a component, not the complete tool. You'll need the Hornady Cam-Lock Bullet Puller body to use it, and that mounts to any single-stage press with standard 7/8"-14 threads. This collet is built for rifle cartridges and jacketed bullets, not cast lead. Hornady makes these in the USA, and the whole system is set up so you can swap collets as your caliber lineup grows.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 392167
  • UPC: 090255921670
  • Collet Size: #14
  • Bullet Diameter: .204
  • Caliber: 20 Caliber
  • Fits Cartridges: 20 VarTarg, 20 Tactical, .204 Ruger
  • Compatibility: Hornady Cam-Lock Bullet Puller (sold separately)
  • Bullet Type: Jacketed rifle bullets (not for cast)
  • Country of Origin: Made in USA
  • Quantity: One collet

What’s Included

  • One Hornady Cam-Lock Bullet Collet #14 for .204 diameter

Frequently Asked Questions

Does the Cam-Lock Collet #14 come with the bullet puller?

No, this is just the collet. It's the insert that clamps onto the bullet, and you'll need the Hornady Cam-Lock Bullet Puller body to actually use it. The puller is sold separately and the collet drops right into it.

What calibers does the #14 collet work with?

The #14 is sized for .204 diameter bullets. That covers the .204 Ruger, 20 VarTarg, and 20 Tactical. If you're loading anything in the 20-caliber family, this is the correct collet.

Can I use this collet to pull cast lead bullets?

No, the Cam-Lock system is designed for jacketed rifle bullets. Cast bullets are too soft and the collet can deform or damage them. Stick to jacketed projectiles for clean, reusable pulls.

What press do I need to run the Cam-Lock puller and this collet?

The Cam-Lock Bullet Puller mounts to any press with standard 7/8"-14 threads, which is the common thread size on single-stage reloading presses. Once the puller is in the press, the #14 collet installs into it and you're ready to pull .204 bullets.

Additional information

UPC

090255921670

Manufacturer

Manufacturer Part Number

392167

Caliber/Gauge

.20 Caliber

Shipping Weight

0.05

Reviews

There are no reviews yet.

Be the first to review “Hornady Cam-Lock Bullet Collet #14 .204 for 20 Cal Rifle Cartridges”