Description
If you run a Hornady Cam-Lock Bullet Puller, the #11 collet is the piece that handles the .410 and .416 crowd. It's the jaw that clamps down on the bullet so you can pull it free from the case, and it's machined for a specific diameter range to get a clean grip every time. Load a cartridge in the shell holder, snug the collet onto the bullet, and a pull of the handle drops the projectile out without the guesswork of an impact puller.
Where the #11 Collet Earns Its Keep
This collet covers bullet diameters from .410 up to .416, which puts it right in the pocket for cartridges like .416 Rigby, .416 Remington, and other big-bore rifle rounds in that neighborhood. Because it's diameter specific, the fit is consistent and the clamping surface stays true to the bullet, which is how you avoid the dents and marks that can happen when a projectile gets manhandled. Reloaders use these collets to break down cartridges when they want to re-use the bullet, powder, or brass, correct a charge, or just tear apart factory ammo for components.
Pairing the Collet with Your Cam-Lock Puller
Keep in mind this is the collet only. It threads into the Hornady Cam-Lock Bullet Puller body (item #050095), which mounts in your reloading press like a standard die. Folks who load for several calibers tend to keep a small stable of these collets on the bench so they can jump from one bullet diameter to the next with a quick swap. If you're pulling bullets in any kind of volume, a press-mounted cam-lock setup moves a lot faster than knocking rounds apart with an inertia hammer, and the collet system is the reason why.
One important note: the Cam-Lock collets are built for rifle cartridges, not pistol rounds. Match the collet number to your bullet diameter and you'll get fast, repeatable pulls session after session.
Key Specifications
- Manufacturer: Hornady
- Collet Number: #11
- Manufacturer Part Number: 392164
- UPC: 090255921649
- Bullet Diameter Range: .410 / .416
- Caliber Designation: .41 Caliber
- Function: Diameter-Specific Bullet Puller Collet
- Compatibility: Hornady Cam-Lock Bullet Puller (Item #050095)
- Intended Use: Rifle Cartridges Only
- Press Type: Single Stage
What’s Included
- One (1) Hornady Cam-Lock Bullet Puller Collet #11 (.410/.416)
Frequently Asked Questions
What bullet diameters does the #11 Cam-Lock collet fit?
The #11 collet is sized for bullet diameters from .410 to .416. That makes it a good match for big-bore rifle rounds like the .416 Rigby and .416 Remington. Hornady also points to this collet for pulling .40-caliber bullets in the .410 range.
Do I need anything else to use the Hornady Cam-Lock Collet #11?
Yes. The collet by itself does not pull bullets, it threads into the Hornady Cam-Lock Bullet Puller body (item #050095), which mounts in your reloading press. If you already own the Cam-Lock puller, this collet simply drops in whenever you need the .410/.416 size.
Will the Cam-Lock collet damage my bullets when I pull them?
No. The diameter-specific design is built to grip the bullet evenly and release it without marking or distorting the projectile. That lets you salvage the bullet, powder, and brass for reuse.
Can I use this collet on pistol cartridges?
The Hornady Cam-Lock collets are intended for rifle cartridges only. If you need to break down pistol ammo, an impact-style bullet puller is the better tool for that job.



Reviews
There are no reviews yet.