Description
If you reload 7mm cartridges and you've ever loaded a round you needed to take apart, this is the piece that makes it painless. The Hornady Cam-Lock Bullet Puller Collet #6 is the .284 caliber grabber that clamps onto the bullet so it slides free without chewing up the jacket, spilling powder, or ruining your brass. It's the business end of the Cam-Lock system, and it's the part that does the actual gripping.
This is collet #6 in Hornady's numbered lineup, matched specifically to a 0.284 bullet diameter. That covers your 7mm loads like 7mm-08, .280 Remington, 7mm Rem Mag, and the rest of the .284 family. Hornady builds a full range of these collets from .172 all the way up to .458, so if you already run a couple sizes on your bench, this one fits right in with the same body and handle.
Where the Collet #6 Fits In
On its own the collet doesn't do anything. It threads into the Hornady Cam-Lock Bullet Puller body (sold separately), which mounts to any press with standard 7/8-14 threads. Once the puller is set up, you raise the cartridge into the die, clamp the handle down on the bullet, and lift the ram to pull it free. Get your adjustment dialed in once and you can run through a whole batch quickly.
Getting the Most Out of the 392159 Collet
This is a rifle-cartridge tool, so keep it to jacketed bullets and leave the cast lead and flush-seated wadcutters out of it. Matching the right collet to your bullet diameter is what keeps the grip clean and the bullet intact, which is the whole point when you're salvaging good components instead of throwing them out. For a 7mm handloader, having the #6 in the drawer means a bad seating depth or a wrong powder charge is a two-minute fix instead of a wasted round.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 392159
- UPC: 090255921595
- Collet Number: #6
- Bullet Diameter: 0.284 in (7mm)
- Caliber: .284 Caliber / 7mm
- Compatibility: Hornady Cam-Lock Bullet Puller (sold separately)
- Intended Use: Jacketed rifle cartridges
- Made In: USA
What’s Included
- One Hornady Cam-Lock Bullet Puller Collet #6 (.284 / 7mm)
Frequently Asked Questions
Does the Collet #6 work on its own, or do I need the bullet puller too?
The collet is only the gripping part of the system, so it needs the Hornady Cam-Lock Bullet Puller body to function. That body threads into any press with standard 7/8-14 threads. If you don't already own the puller, you'll want to pick one up alongside this collet.
What calibers does the .284 collet cover?
Collet #6 is sized for a 0.284 bullet diameter, which is your 7mm family. That includes rounds like 7mm-08 Remington, .280 Remington, .284 Winchester, and 7mm Rem Mag. As long as your bullet measures .284, this is the right one.
Will this pull cast lead bullets?
No, the Cam-Lock system is built for jacketed rifle bullets and isn't meant for cast lead or flush-seated wadcutters. The collet grips the bullet firmly, which can damage softer cast projectiles. Stick to jacketed bullets for clean, reusable results.
Will the bullet or brass get damaged when I pull a round?
When you're using the correctly matched collet for your bullet diameter, the puller removes the bullet without harming it, and your brass and powder stay intact for reuse. That's the whole reason to match collet #6 to your 7mm loads. Getting the size right is what keeps everything salvageable.



Reviews
There are no reviews yet.