Description
If you've picked up a box of Hornady's 6.5mm A-Tip Match bullets, you already know the long aluminum tip is the whole point. That precision-swaged nose is what gives the A-Tip its high BC and shot-to-shot consistency, and it's also what a standard seating stem can bruise. This stem is machined specifically to cradle the profile of the 6.5mm 135 and 153 grain A-Tip, so you get clean seating without flattening or scratching the tip.
It's a simple swap. Pull the factory stem out of your Hornady Custom Grade seating die, thread this one in, and you're set. The fit between stem and bullet nose is what keeps runout down and seating depth uniform round after round, which is exactly what you're chasing when you load a bullet this deliberate. Reloaders who run a selection of stems to dial in the ideal contact point will appreciate how this one matches the ogive of the A-Tip.
Why the 6.5mm A-Tip Stem Matters
The A-Tip's aluminum tip is longer and more delicate than a typical polymer tip, and the wrong contact surface can deform it enough to throw off ballistic uniformity. Because this stem is cut to the exact nose profile, contact stays even and the tip comes out of the press the way it went in. For long-range target work and precision rifle competition, that consistency at the muzzle translates to tighter groups downrange.
Fitment for the Hornady A-Tip Seating Stem
This is part number 397138, and it covers both the 135 grain and 153 grain 6.5mm A-Tip bullets. It's built to work only with Hornady Custom Grade New Dimension seating dies and is not compatible with dies from other makers. Made in the USA and backed by Hornady's lifetime warranty, it's a small part that earns its keep every time you load match ammo.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 397138
- UPC: 090255971385
- Caliber: 6.5mm (.264 diameter)
- Bullet Weight: 135 and 153 grain
- Bullet Type: A-Tip Match
- Compatibility: Hornady Custom Grade New Dimension seating dies only
- Series: Bullet Seating Stems
- Quantity: 1 stem
- Material: Machined steel
- Country of Origin: USA
- Warranty: Hornady Lifetime Warranty
What’s Included
- 1 Hornady A-Tip Match seating stem (6.5mm .264, 135/153 gr, part 397138)
Frequently Asked Questions
Which dies does the Hornady A-Tip seating stem fit?
It's designed to work only with Hornady Custom Grade New Dimension seating dies. You pull the standard stem out of your seating die and thread this one in its place. It is not compatible with seating dies from other manufacturers.
Does this stem work for both 135 and 153 grain 6.5mm A-Tip bullets?
Yes. Part number 397138 is machined to seat both the 135 grain and 153 grain 6.5mm (.264) A-Tip Match bullets. A single stem covers both weights in that caliber.
Why do I need a special stem for A-Tip bullets?
The A-Tip uses a long aluminum tip that a standard seating stem can deform during the seating stroke. This stem is machined to the exact nose profile of the A-Tip, so it seats the bullet with even contact and keeps the tip undamaged. That protects the bullet's ballistic consistency and helps hold uniform seating depth.
How do I install the A-Tip seating stem?
Remove the factory seating stem from your Hornady Custom Grade seating die and install this one in its place. No special tools are needed for the swap. Once it's in, set your seating depth as usual and you're ready to load.




Reviews
There are no reviews yet.