Description
If you've spent any time at a reloading bench, you know the case is where it all starts, and Hornady treats its brass like the foundation it is. This 7mm-08 Remington brass is made with the same attention to detail Hornady is known for in its bullets, giving you a clean, uniform starting point for working up a load that shoots the way you want it to.
What Sets Hornady 7mm-08 Brass Apart
The big draws here are consistency and uniformity. These cases are measured for tight wall concentricity, which helps the bullet seat properly in both the case and the chamber and release evenly when the round goes off. Uniform wall thickness and consistent internal capacity mean your powder charges burn the same way every time, which translates to steadier pressures, velocity, and accuracy down range. Hornady also runs its brass through a pressure calibration test to confirm the cases expand uniformly during firing.
Putting the Hornady 8646 Cases to Work
The 7mm-08 is a favorite among deer and target rifle crowds for a reason. It's efficient, mild on recoil, and plenty flat-shooting out to reasonable hunting distances. Starting with quality brass lets you tune that cartridge to your rifle, whether you're chasing tight groups at the range or building a dependable hunting load. Because this brass is new and unprimed, you've got a blank slate for your own primer, powder, and bullet combination, and it holds up well through repeated firings when you keep up with trimming and prep.
Keep in mind this is a reloading component, not loaded ammunition. You'll want your dies, primers, powder, and bullets ready to go before these cases earn their keep. For anyone who likes building loads from the ground up, Hornady brass is a solid, trustworthy place to begin.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 8646
- UPC: 090255486469
- Caliber: 7mm-08 Remington
- Material: Brass
- Condition: New, Unprimed
- Product Type: Rifle
- Quantity: 50 Per Box
- Recommended Usage: Reloading
- Series: Cartridge
What’s Included
- 50 Hornady 7mm-08 Remington new unprimed brass cases
Frequently Asked Questions
Is the Hornady 8646 7mm-08 brass primed or unprimed?
These are new, unprimed cases, so there's no primer installed. You'll add your own primer, powder, and bullet during the reloading process. It's a reloading component and not loaded ammunition.
What makes Hornady 7mm-08 brass worth the upgrade over bulk brass?
Hornady measures these cases for tight wall concentricity and uniform wall thickness, and runs them through a pressure calibration test for consistent case expansion. That uniformity in weight and internal capacity gives you more repeatable pressures, velocity, and accuracy than typical commodity brass. For handloaders chasing tight groups, that consistency pays off.
Do I need to prep this brass before loading it?
New Hornady brass is clean and ready to work with, but like any new brass it benefits from standard prep. Many reloaders check case length, trim if needed, chamfer and deburr the necks, and uniform the primer pockets before the first load. Doing so helps you get the most consistent results from the start.
Can I reload these 7mm-08 cases multiple times?
Yes, quality brass like this is made to be reloaded across multiple firings. How many cycles you get depends on your load pressure, your dies, and how carefully you handle resizing and trimming. Keep an eye on case length and inspect for signs of wear, and this brass will give you plenty of use.




Reviews
There are no reviews yet.