Description
If you handload for the 6.8 Remington SPC, your brass is the real starting point for accuracy, and Hornady's 8629 cases give you a dependable one. These are brand new, unprimed cases made with the same attention to detail that built Hornady's reputation in the reloading world. Each case is manufactured to tight tolerances for uniform wall thickness, consistent weight, and tight concentricity, which is exactly what you want when you're chasing repeatable groups downrange.
What Sets Hornady 6.8 SPC Brass Apart
Concentricity is one of those specs that quietly makes or breaks a load. When the case walls are uniform, the bullet seats straight in both the case and the chamber, and it releases cleanly on firing. Hornady produces these cases in smaller lots and runs them through a pressure calibration test to confirm uniform case expansion. The payoff is better shot to shot consistency and the kind of predictable performance that bargain-bin brass just can't match.
Prepping Your Hornady 8629 Cases
One detail worth knowing up front: Hornady 6.8 SPC brass uses a small rifle primer pocket, so make sure you've got small rifle primers on the bench before you start. These arrive unprimed and ready for your usual prep routine of sizing, trimming to length, chamfering, and deburring. From there you can prime, charge, and seat to your preferred recipe. Reloaders who run these cases tend to get solid life out of them across multiple firings when they're cared for properly.
The 6.8 SPC was built to punch above the 5.56 in short-barreled AR-platform rifles, and good brass is a big part of getting the most out of that cartridge. Whether you're loading hunting rounds or working up a tack-driving range load, these Hornady cases give you a clean, consistent base to build on. Keep in mind this is a reloading component only and not loaded ammunition.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 8629
- UPC: 090255486292
- Caliber: 6.8mm Remington SPC
- Component Type: Unprimed Rifle Brass
- Material: Brass
- Primer Size: Small Rifle
- Condition: New, Unprimed
- Quantity: 50 Per Box
- Product Type: Rifle
What’s Included
- 50 new unprimed Hornady 6.8mm Remington SPC brass cases
Frequently Asked Questions
What primer size does Hornady 8629 6.8 SPC brass use?
This Hornady 6.8 SPC brass uses a small rifle primer pocket. Keep in mind that some older 6.8 SPC brass from other makers used large rifle primers, so always confirm your primer size before loading. For these Hornady cases, stock up on small rifle primers and you're good to go.
Is the Hornady 8629 brass primed or loaded ammunition?
No, these are new unprimed cases and not loaded ammunition. They're a reloading component, so you'll need to prime, charge, and seat your own bullets. They arrive ready for your normal case prep routine.
Do I need to trim and prep the cases before loading?
As with any new brass, it's good practice to check case length, chamfer, and deburr the case mouths before your first load. The cases are made to tight dimensions out of the box, but a quick prep pass helps ensure consistent seating and uniform results. Many reloaders also give the primer pockets a quick once-over before priming.
How many reloads can I expect from Hornady 6.8 SPC brass?
With proper sizing, trimming, and reasonable load pressures, these cases hold up well across multiple firings. Case life depends on your loads and prep habits, but Hornady brass is known for giving reloaders good longevity. Treating it as a reusable foundation rather than a one-time component helps you get the most out of each case.




Reviews
There are no reviews yet.