$40.99
14 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Hornady developed the 6.5 PRC, so it makes sense that their brass is the benchmark most reloaders start with for this cartridge. These are new, unprimed cases built to the same standards Hornady holds for the brass in their loaded Match and Precision Hunter ammo. If you want a clean slate to work up a load from, this is about as straightforward as it gets.
Consistency is the name of the game with precision reloading, and Hornady focuses on the stuff that actually moves the needle. The cases are made with tight wall concentricity, which helps the bullet seat straight and release uniformly on firing. You also get consistent internal capacity and matched case weights across the batch, so your powder charges behave predictably from one round to the next. That translates to tighter velocity spreads, which is exactly what you're after when you're reaching way out there.
The 6.5 PRC runs at magnum pressures and was purpose-built to push heavy, high-BC 6.5mm bullets fast out of a short action. It uses a large rifle primer and pairs best with slower-burning magnum rifle powders. Because of those pressures, how you treat the brass matters. Full-length size, bump the shoulder back around .002 inches for your chamber, keep an eye on your primer pockets, and you'll get a healthy number of firings before the brass is done. Annealing after a few cycles will stretch case life even further if you're chasing every bit of consistency.
Since these come new from the factory, you skip the cleanup that comes with range pickup brass. Most reloaders still like to run new cases through a sizing die and check case length before the first load, but the heavy lifting is done. Grab a box, prime it, and get to the bench. It's a trusted, widely available option that keeps your 6.5 PRC fed without breaking the bank on premium match brass.
They are unprimed, new brass cases. You'll add your own large rifle primer, powder, and bullet to build a complete round. This is a reloading component, not loaded ammunition.
The 6.5 PRC runs at magnum pressures, so case life depends heavily on your load and your sizing setup. With sensible charges, proper full-length sizing, and about a .002 inch shoulder bump, most reloaders get a good number of firings before the primer pockets loosen. Annealing after a few cycles can extend that life even further.
These cases take a large rifle primer. Pair them with a slower-burning magnum rifle powder, which is what the 6.5 PRC was designed around, and you'll be set up for strong long-range performance.
The cases come ready to load, but it's good practice to run new brass through a sizing die and check case length before your first loading. That small step helps ensure uniform neck tension and consistent dimensions right from the start.
| UPC | 090255862881 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 86288 |
| Caliber/Gauge | 6.5mm PRC |
| Length | 7.8500 |
| Product Type | Rifle |
| Quantity | 50 |
| Shipping Weight | 1.68 |
You must be logged in to post a review.
Reviews
There are no reviews yet.