Description
Hornady 7060 Crimp-On Gas Checks are a staple for anyone casting their own 7mm bullets. These little copper cups crimp onto the base of a cast lead bullet during the sizing step, forming a tough shield that protects the bullet base and seals off propellant gases the moment you touch off the primer. For casters chasing clean bores and dependable results, they're one of the simplest upgrades you can add to your loading bench.
Why 7mm Casters Reach for the 7060 Gas Checks
The whole point of a gas check comes down to what happens at the base of the bullet under pressure. Copper has a much higher melting point than lead alloys, so when hot gas tries to sneak past the bullet and start gas cutting, the check takes the heat instead of your soft lead base. That means far less lead fouling left behind in the bore, which translates to easier cleanup and more consistent accuracy shot to shot. It also lets you drive cast bullets to velocities that would normally leave a plain-base bullet streaking the barrel with lead.
Fitting the Hornady 7060 Gas Checks
These are the crimp-on style, so they're built to grip the gas check shank on a properly designed mold. During sizing, the check squares up and crimps firmly to the heel of the bullet, locking in place for the trip down the barrel. Casters consistently note how easily these seat onto the shank and how little fuss they add to an otherwise routine sizing pass. You'll want a bullet design cut specifically for a gas check shank to get the best grip.
What's in the 7060 Box
Each box holds 1000 checks, which is plenty to keep a steady casting rotation stocked for a good while. They're a .284 caliber fit for 7mm and 28 caliber cast projectiles, made in the USA, and carry the Hornady name that generations of casters have trusted on the bench. If you're loading hot 7mm cast bullets and want a cleaner bore with better downrange consistency, these earn their spot in the loading room.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 7060
- UPC: 090255270600
- Caliber: 7mm / .284 (28 Caliber)
- Type: Crimp-On Gas Check
- Material: Copper
- Bullet Type: Cast Bullets
- Quantity: 1000 Per Box
- Country of Manufacture: United States
What’s Included
- 1000 Hornady 7mm (.284) crimp-on gas checks
Frequently Asked Questions
What does the Hornady 7060 gas check do for my cast bullets?
It crimps onto the base of a 7mm cast bullet during sizing and acts as a copper shield at the heel. That seal keeps hot gas from cutting past the bullet and melting lead onto your bore, which reduces leading and keeps your groups more consistent. It also lets you run cast bullets at higher velocities than a plain base would handle cleanly.
Will these 7060 checks fit any 7mm cast bullet?
They're designed for bullets cast from a mold with a dedicated gas check shank. The crimp-on style grips that smaller-diameter base, so a plain-base bullet without the shank won't take them properly. As long as your mold is cut for a gas check, the .284 size is the right fit for 7mm and 28 caliber.
How do I apply the Hornady crimp-on gas checks?
You seat them during the sizing step. Place the check on the gas check shank, then run the bullet through your sizing die, which squares up the check and crimps it firmly to the base. Casters regularly mention how easily these go on with no real added hassle to the sizing pass.
Do I really need gas checks to shoot cast 7mm bullets?
Not always. At lower velocities a well-fit, properly lubed cast bullet can run clean without one. Gas checks earn their keep on hotter, higher-pressure loads and when you want to push velocity up without streaking the bore with lead, which is common territory for 7mm rifle cartridges.





Reviews
There are no reviews yet.