Description
The .45-70 Government is one of those cartridges that rewards handloading. Factory ammo can get pricey and limited, and once you start rolling your own you can dial in everything from light cowboy loads to stout lever-gun hunting rounds. This Hornady Custom Grade Series II set gives you the three dies you need for straight-walled rifle brass: a full-length sizer, a pistol-style expander, and a seater die, all packed in a stackable red storage box.
Because the .45-70 is a straight-walled case, Hornady uses a separate expander die rather than relying on an expander ball in the sizer. That extra station lets you put a clean flare on the case mouth, which makes seating those big .458 bullets a lot less fiddly and helps prevent shaving lead or crumpling brass.
What Sets the Hornady Series II Dies Apart
The standout here is the Zip Spindle design. A series of light threads cut on both the spindle and collet let you make fine incremental adjustments by turning the spindle, or zip it up and down quickly for bigger moves. Once it's set, it locks positively so you don't fight slippage every time you tighten the spindle lock. The elliptical expander is another Hornady touch, running smoother than a traditional ball expander and cutting down on friction and case neck stretch, which is good news for brass life.
Dialing In the Hornady .45-70 Die Set
The seater die uses a floating alignment sleeve that holds the bullet, case neck, and seating stem in line before the bullet enters the case, so you get straight, consistent seating. There's a built-in crimper in the seater too, which matters for tubular magazine lever guns like the Marlin 1895 and Henry where you want a solid roll crimp to keep bullets from setting back under recoil. The Sure-Loc lock rings clamp around the full die body instead of pinching the threads with a set screw, so your settings hold and the die threads stay clean. These are backed by Hornady's reputation for machined quality and a lifetime of normal use.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546566
- UPC: 090255565669
- Caliber: .45-70 Government
- Product Type: 3-Die Set
- Series: Custom Grade Series II
- Dies Included: Full Length Sizer, Expander, Seater
- Bullet Diameter: .458
- Spindle Design: Zip Spindle
- Expander Type: Elliptical Expander
- Lock Rings: Sure-Loc
- Crimp: Built-in roll crimp in seater die
- Shipping Weight: 1.75 lbs
What’s Included
- Full-length sizer die
- Expander die
- Seater die with built-in crimper
- Sure-Loc lock rings
- Stackable die storage box
Frequently Asked Questions
Does the Hornady Series II .45-70 set include a shell holder?
No, Hornady Custom Grade die sets do not come with a shell holder. You'll need to pick up the correct shell holder for the .45-70 Government case head separately. The die box does have a spot to store a shell holder once you have one.
Will this die set crimp for a tubular magazine lever gun?
Yes. The seater die has a built-in roll crimp, which is exactly what you want for lever guns like the Marlin 1895 and Henry that feed from a tube magazine. A good crimp keeps the bullets from setting back under recoil while they sit in the magazine. You can also seat and crimp in separate steps if you prefer to fine-tune each operation.
What does the Zip Spindle actually do on these dies?
The Zip Spindle is Hornady's decapping and expander spindle that locks positively to eliminate slippage. The light threading lets you make small, precise adjustments by turning it, or move it quickly up and down for bigger changes. It takes the knuckle-busting out of tightening the spindle lock after you set it.
Why does this .45-70 set have three dies instead of two?
The .45-70 is a straight-walled rifle cartridge, so Hornady includes a separate pistol-style expander die alongside the full-length sizer and seater. That expander puts a slight flare on the case mouth, which makes seating big .458 bullets easier and helps prevent damaging the brass or shaving the bullet.



Reviews
There are no reviews yet.