Description
The .35 Remington is a classic woods cartridge that loves a good handload, and the Hornady Custom Grade Series III 2-Die Set gives you the tools to feed it right. This full-length set pairs a sizing die with a bullet seating die, both machined to tight tolerances so your cases come out straight and your bullets seat where you want them. If you run a Marlin 336 or any other .35 Rem and want ammo tuned to your rifle, this is the foundation.
Hornady starts these dies as select steel that gets heat-treated for durability, then hand-polishes the inside of the sizing die to a mirror finish. That smooth internal surface means cases slide in and out without sticking or scratching, which keeps your brass in good shape and your sizing effort low. The dies are so well built that Hornady guarantees them never to break or wear out from normal use.
What Sets the Series III .35 Remington Dies Apart
The big story here is the Zip Spindle design. A series of light threads on the spindle and collet let you make fine depth adjustments by turning the spindle, or zip it up and down quickly for bigger moves, all while locking positively so it won't slip mid-session. The elliptical expander is another Hornady touch worth mentioning, giving you smoother neck sizing with less friction and reduced case neck stretch compared to a standard ball expander.
Dialing In Your .35 Remington Handloads
The seating die uses an in-line bullet seating system with a seater adjustment screw and a built-in crimper, so you can set consistent overall length and add a roll crimp for tubular magazine rifles. The Sure-Loc lock rings with wrench flats clamp around the full die body to hold your settings put. Everything stores in a compartmentalized die box. These dies use the standard 7/8"-14 thread, so they drop right into any common single-stage or progressive press.
Key Specifications
- Manufacturer: Hornady
- Product Line: Custom Grade Series III (New Dimension)
- Caliber: .35 Remington (.358 bullet diameter)
- Die Set Count: 2 dies
- Included Dies: Full-length sizing die and bullet seating die
- Die Type: Full Length Sizing / Seating
- Spindle System: Zip Spindle
- Expander: Elliptical expander
- Crimp: Built-in crimper
- Thread Size: 7/8"-14
- Material: Heat-treated select steel
- Shell Holder: #26 (sold separately)
- Country of Origin: USA
- Manufacturer Part Number: 546398
- UPC: 090255563986
- Shipping Weight: 1.35 lbs
What’s Included
- Full-length sizing die
- Bullet seating die with expander assembly
- Compartmentalized storage box
Frequently Asked Questions
Does the Hornady Custom Grade Series III .35 Remington set include a shell holder?
No, a shell holder is not included in the box. This set calls for a #26 shell holder, which you'll need to pick up separately. The dies themselves come packaged in a compartmentalized storage box.
Will this die set work on my press?
Yes, these dies use the industry-standard 7/8"-14 thread, so they thread into any common single-stage or progressive reloading press. That covers Hornady, RCBS, Lee, Lyman and most other brands. No special adapter needed.
Can I crimp with the Series III .35 Remington dies?
Yes, the seating die includes a built-in crimper, which is handy since the .35 Remington is often run in tubular-magazine lever guns like the Marlin 336 that benefit from a roll crimp. You can set the crimp during the seating step. Just back it out if you'd rather seat without crimping.
What is the Zip Spindle feature on these dies?
The Zip Spindle uses a series of light threads cut on both the spindle and collet. That lets you make small, precise adjustments by turning the spindle, or zip it quickly up and down for bigger changes, and it locks positively so it won't slip while you work. It also makes tightening the spindle lock much easier on your hands.





Reviews
There are no reviews yet.