Description
If you're loading 6mm Creedmoor and want dies that just work trip after trip, the Hornady Custom Grade Series III 2-Die Set covers the two jobs that matter most: full-length sizing and bullet seating. The full-length size die brings your fired cases back to SAAMI minimum spec so they chamber smoothly in any 6mm Creedmoor rifle, and the seater die sets your bullet to the depth you want with repeatable results. These are precision machined steel dies with one of the smoother internal finishes you'll find, and Hornady guarantees them never to break or wear out under normal use.
What Sets the Series III 6mm Creedmoor Dies Apart
The Zip Spindle is the feature handloaders tend to appreciate once they've fought a slipping spindle on lesser dies. It uses a series of light threads cut into the spindle and collet, so the lock stays put and dialing in your sizing is quick and painless. The integrated Elliptical Expander is another standout. Instead of a traditional ball expander, it glides through the case neck with less friction and less neck stretch, which means straighter necks and longer case life.
Loading With the Hornady 2-Die Set
The seater die runs a floating alignment design to pre-align the bullet and case before seating, which helps keep runout low and groups tight. A locking retainer ring near the base of the seater pops off in seconds, so cleaning and swapping decap pins is simple. Each die wears a Hornady Sure-Loc lock ring that clamps around the full die body for even, consistent pressure that won't walk on you.
Everything arrives in a stackable die storage box with room left over for a shell holder, Lock-N-Load bushings, and small parts. Shell holder, bushings, and press accessories are sold separately. For 6mm Creedmoor shooters chasing accuracy on a budget without cutting corners, this is a dependable, do-it-all starting point.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546295
- UPC: 090255705973
- Caliber: 6mm Creedmoor
- Product Type: 2-Die Set
- Die Series: Series III / Custom Grade
- Die Function: Full-Length Sizer and Seater
- Material: Steel
- Expander Type: Elliptical Expander
- Adjustment System: Zip Spindle
- Length: 7.4 in
- Shipping Weight: 1.3 lbs
What’s Included
- Full-Length Size Die with Sure-Loc Lock Ring
- Seater Die with Sure-Loc Lock Ring
- Elliptical Expander
- Headed Decap Pins
- Zip Spindle
- Stackable die storage box
Frequently Asked Questions
Is this Hornady Series III set a 2-die or 3-die set?
This is the 2-die configuration, which includes a full-length sizing die and a bullet seating die. That covers the core steps for most 6mm Creedmoor handloaders. If you specifically want a separate neck sizing die, you'd look at a 3-die set, but for standard full-length loading these two dies are all you need.
What is the Zip Spindle and why does it matter?
The Zip Spindle is Hornady's decapping spindle design with light threads cut into the spindle and collet. Those threads keep the spindle from slipping when you tighten the lock, so your sizing and depriming stay consistent. It also makes adjustments quick without fighting a stubborn lock.
Will I need a shell holder or bushings to use these dies?
The shell holder is sold separately and is sized to your press and cartridge rim, so grab the correct one for 6mm Creedmoor. If you're running a modern Hornady press with the Lock-N-Load bushing system, you'll also want Hornady die bushings, which are sold on their own. The dies themselves use standard 7/8-14 threads and fit common single-stage and progressive presses.
Does the seater die crimp the bullet too?
The Custom Grade seater die can apply a crimp to help secure the bullet in the case. For most precision 6mm Creedmoor loads shot from bolt guns, handloaders skip the crimp, but it's there if you're loading for a gas gun or want the extra bullet hold. You control it through the die's adjustment.




Reviews
There are no reviews yet.