0
0

Hornady Custom Grade Series IV 2-Die Set – 6.5×300 Weatherby Mag

UPC: 090255562835

$100.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6.5×300 Weatherby Magnum is a fast, flat-shooting overbore cartridge, and loading it right takes dies that hold alignment shot after shot. This Hornady Custom Grade Series IV 2-die set covers exactly that, pairing a full-length sizer with a seater die that keeps bullet runout low and consistency high. Series IV sets are built for the more specialized and lower-volume rifle cartridges, which is right where the 6.5×300 lives.

What Makes the Series IV 6.5×300 Weatherby Die Set Tick

The full-length sizer carries Hornady's Zip Spindle design. A series of light threads cut into the spindle and collet lets you make fine, incremental adjustments by turning the spindle, or zip it up and down quickly for bigger moves, all while locking down tight so it won't slip mid-session. There's also a sturdy steel decapper that handles spent primers without drama, and the all-steel seater adjustment screw uses a compression washer for fine, repeatable depth changes.

Seating Bullets Straight With the Hornady 2-Die Set

The seater die uses Hornady's in-line seating system. A floating alignment sleeve holds the bullet, case neck, and seating stem in line before the bullet ever enters the neck, so everything stays centered during the seating stroke. That translates to straighter ammo and better accuracy downrange, which matters a lot when you're wringing out a long-range 6.5. The seater also includes a built-in crimper if you want it.

Built to Last

Hornady steel dies are hand-inspected and heat-treated, and the internal finish is one of the smoothest in the business. These dies are guaranteed never to break or wear out from normal use, so once you get your loads dialed, this set will keep running for as long as you're loading for the 6.5×300. The dies use standard 7/8-14 threads and drop right into any common single-stage or progressive press.

Key Specifications

  • Manufacturer: Hornady
  • Series: Custom Grade Series IV
  • Caliber: 6.5×300 Weatherby Magnum
  • Bullet Diameter: 0.264 in
  • Product Type: 2-Die Set
  • Dies Included: Full-Length Sizer, Seater
  • Thread Size: 7/8-14
  • Material: Steel
  • For Use With: Bottleneck Rifle Cartridge
  • Manufacturer Part Number: 546283
  • UPC: 090255562835
  • Shipping Weight: 1.5 lbs

What’s Included

  • Full-length sizer die with Zip Spindle
  • Seater die with in-line bullet seating system
  • Storage box

Frequently Asked Questions

What dies come in the Hornady 6.5×300 Weatherby 2-die set?

This set includes a full-length sizer die and a seater die. The sizer resizes the case back to spec and decaps the spent primer, while the seater sets your bullet to depth with its in-line alignment sleeve. It's the standard two-die setup for a bottleneck rifle cartridge like the 6.5×300.

Does the seater die crimp?

Yes, the Series IV seater has a built-in crimper, so you can apply a crimp without buying a separate crimp die. That said, most handloaders running a precision 6.5×300 skip the crimp to keep neck tension consistent, which is better for accuracy. The feature is there if your load calls for it.

What is the Zip Spindle and why does it matter?

The Zip Spindle is Hornady's decapping spindle design with light threads cut into the spindle and collet. It lets you make fine adjustments by turning it or zip it up and down quickly for larger moves, and it locks down so it won't slip during sizing. It takes the knuckle-busting out of tightening the spindle lock.

Will these dies fit a standard reloading press?

Yes. The dies use standard 7/8-14 threads, so they thread into any common single-stage or progressive press. You'll want the correct shell holder for the 6.5×300 Weatherby case head, which is sold separately.

Additional information

UPC

090255562835

Manufacturer

Manufacturer Part Number

546283

Caliber/Gauge

6.5×300 Weatherby Mag

Product Type

2-Die Set

Shipping Weight

1.5

Reviews

There are no reviews yet.

Be the first to review “Hornady Custom Grade Series IV 2-Die Set – 6.5×300 Weatherby Mag”