Description
The 6mm GT earned its following in precision rifle circles for a reason. It feeds well from a magazine, runs efficiently on Varget and similar powders, and is known for being forgiving during load development while still delivering tight velocity spreads. If you're reloading for this cartridge, you want dies that keep your rounds consistent round after round, and this Hornady Custom Grade Series III set is built to do exactly that.
What You Get in the Hornady 6mm GT Die Set
This is a two-die configuration: a full-length sizing die and a bullet seating die with expander assembly. The sizer die brings fired brass back into spec, while the seater handles bullet depth with a straightforward adjustment screw. The full-length sizer is cut with a .266" neck diameter, which gives you right around .002" of neck tension when running Alpha Munitions or Hornady 6mm GT brass. That's a sweet spot for a lot of handloaders chasing accuracy.
How the Custom Grade Dies Earn Their Keep
Hornady machines these from select steel with one of the finest internal finishes in the business, and the inside is polished smooth so cases glide in and out without sticking. The elliptical expander is a nice touch over old-school ball expanders, reducing friction and case neck stretch as the neck passes through. Each die uses Hornady's Sure-Loc lock ring, which clamps around the whole die body and holds your settings put without chewing up the threads, and the wrench flats make swaps painless.
Hornady backs these dies with their lifetime guarantee against breaking or wearing out under normal use, so this is a set you can lean on for years of load development and match prep. Keep in mind a shell holder is sold separately, so grab the correct one if you don't already have it on your bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546243
- UPC: 090255562439
- Caliber: 6mm GT
- Die Series: Custom Grade Series III
- Number of Dies: 2
- Die Types: Full-Length Sizing, Bullet Seating
- Sizer Neck Diameter: .266"
- Thread Size: 7/8"-14
- Lock Ring: Sure-Loc with wrench flats
- Expander: Elliptical Expander
- Shell Holder: Sold separately
- Shipping Weight: 1.315 lbs
What’s Included
- Full-length sizing die
- Bullet seating die with expander assembly
- Sure-Loc lock rings
- Storage box
Frequently Asked Questions
Does the Hornady 6mm GT die set include a shell holder?
No, a shell holder is not included and is sold separately. Hornady packages this as a two-die set with the full-length sizer and seater only. You'll want to pick up the correct shell holder for the 6mm GT case head if you don't already have one on your bench.
What neck tension does this full-length sizer give on 6mm GT brass?
The full-length sizing die is cut with a .266" neck diameter. That works out to roughly .002" of neck tension when you're loading Alpha Munitions or Hornady 6mm GT brass, which is a common target for precision loads. If you want something different, measuring your loaded rounds and brass is always the way to confirm.
Is the 6mm GT a good cartridge to reload for?
It's one of the friendlier precision cartridges to handload. The 6mm GT was designed with Varget in mind, burns powder efficiently, and is known for a forgiving load window that still produces consistent velocity spreads. That reputation is a big part of why it has caught on so quickly in PRS and long-range circles.
Are these Custom Grade dies guaranteed?
Yes. Hornady builds these from heat-treated select steel and backs them with a lifetime guarantee against breaking or wearing out under normal use. If something fails in normal reloading, they'll repair or replace it.




Reviews
There are no reviews yet.